Bob Clifton wrote: > > The beams for a group of four sixteenth notes in Layer Two are partially > obscuring the notehead for an eighth note in Layer One. I thought, well > I'll just nudge the beam(s) up or down a little and that will fix it > (though I'd never encountered the problem before). I got out the Special > Tools palette and found that I could change just about everything but what > I needed to change. I could change the stem lengths, but they were not > then attached to the beam(s). I could move the secondary beam toward or > away from the primary beam. I could squish the beams down to a point. I > could change the angle or flatten them to horizontal. About the only thing > I could not do was find a handle for the beam(s) and nudge it vertically up > or down. >
I may be missing something in your question, but it seems to me you're just about there. Special Tools --> Beam Angle Tool gives two handles on each beam. Drag the right one to change the angle, drag the left one to move the whole beam vertically. (At least that's how it works on Fin.2000c, Mac) Is this what you need? Cheers, Ch.S. _______________________________________________ Finale mailing list [EMAIL PROTECTED] http://mail.shsu.edu/mailman/listinfo/finale
