On 16.07.2002 15:09 Uhr, Bob Clifton wrote

> The beams for a group of four sixteenth notes in Layer Two are partially
> obscuring the notehead for an eighth note in Layer One.  I thought, well
> I'll just nudge the beam(s) up or down a little and that will fix it
> (though I'd never encountered the problem before).  I got out the Special
> Tools palette and found that I could change just about everything but what
> I needed to change.  I could change the stem lengths, but they were not
> then attached to the beam(s).  I could move the secondary beam toward or
> away from the primary beam.  I could squish the beams down to a point. I
> could change the angle or flatten them to horizontal.  About the only thing
> I could not do was find a handle for the beam(s) and nudge it vertically up
> or down.

You must have missed the right tool, it is certainly there, though it is
hard to explain what it looks like. Probably best to look up Special Tools
in the manual.

Johannes
-- 
http://www.musikmanufaktur.com
http://www.camerata-berolinensis.de

_______________________________________________
Finale mailing list
[EMAIL PROTECTED]
http://mail.shsu.edu/mailman/listinfo/finale

Reply via email to