At 11:15 AM 7/16/02 -0400, Charles Small wrote: >Bob Clifton wrote: > > > > The beams for a group of four sixteenth notes in Layer Two are partially > > obscuring the notehead for an eighth note in Layer One. I thought, well > > I'll just nudge the beam(s) up or down a little and that will fix it > > (though I'd never encountered the problem before). I got out the Special > > Tools palette and found that I could change just about everything but what > > I needed to change. I could change the stem lengths, but they were not > > then attached to the beam(s). I could move the secondary beam toward or > > away from the primary beam. I could squish the beams down to a point. I > > could change the angle or flatten them to horizontal. About the only thing > > I could not do was find a handle for the beam(s) and nudge it vertically up > > or down. > > > > > I may be missing something in your question, but it seems to me you're > just about >there. >Special Tools --> Beam Angle Tool gives two handles on each beam. Drag the >right one >to change the angle, drag the left one to move the whole beam vertically. >(At least >that's how it works on Fin.2000c, Mac) Is this what you need? > Cheers, Ch.S.
That's what I need. I hadn't actually tried that tool because it is named "Beam Angle" and I didn't want to change the angle. I am now happily beamed up. Thanks a million, Scotty ... I mean, Charles. Bob C. _______________________________________________ Finale mailing list [EMAIL PROTECTED] http://mail.shsu.edu/mailman/listinfo/finale
