Kevin Rasch wrote: > Could someone elaborate on what is the problem and what is the solution? > I had the same error as the original poster so I looked in /usr/local for > something gmp. Grep found a gmp.h in /usr/local/include/ and so I used > sudo mv to put this in my home directory. I tried to build gcc4.4 in fink > and I get basically the same error message again. I installed gcc4.4 from > http://hpc.sourceforge.net and I suspect this is the source of the problems, > but I don't know how to carefully remove that gcc4.4 and not break other > things. > > (I tried to share the error message but I can't get around the 80 character > per > line limitation) > > > > The problem is that you're linking to stuff that is either of a different version than our package, or is otherwise built differently. The solution in general is to move that stuff to where Fink can't find it.
I'm not sure if your "this" was just gmp.h, or the whole directory, but we usually suggest moving the whole /usr/local directory out of the way, e.g. sudo /usr/local /usr/local.moved Is your error message _identical_ to what the original poster saw? If not, then there may be crosstalk from your third-party gcc4.4. It's going to be impossible to say for sure in any case without your somehow providing the last few lines of the output--the last line from the compiler and then the remaining lines. Try just sending this in email to get around character limits. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Fink-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/fink-users
