On 10/26/14, 8:18 AM, Lukas Reichlin wrote:
> Hi Alexander
>
> After installing octave382-ref successfully with all my packages, I ran into
> the problem below while installing the new Octave GUI.
>
> Best regards,
> Lukas
>
>
> Octave successfully built. Now choose from the following:
>
> ./run-octave - to run in place to test before installing
> make check - to run the tests
> make install - to install (PREFIX=/sw)
>
> Makefile:2848: warning: overriding commands for target `check'
> Makefile:2410: warning: ignoring old commands for target `check'
> make[3]: Nothing to be done for `install-exec-am'.
> /sw/bin/gmkdir -p
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/site/m
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/site/api-v49+/m
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/site/m
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/oct/x86_64-apple-darwin
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/oct/api-v49+/x86_64-apple-darwin
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/site/oct/x86_64-apple-darwin
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/exec/x86_64-apple-darwin
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/api-v49+/site/exec/x86_64-apple-darwin
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/site/exec/x86_64-apple-darwin
> /sw/bin/gmkdir -p
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
> /sw/bin/ginstall -c -m 644 config.h
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
> /sw/bin/gmkdir -p
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc'
> /sw/bin/ginstall -c -m 644 CITATION NEWS config.log
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc'
> /sw/bin/gmkdir -p
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
> /sw/bin/ginstall -c -m 644 oct-conf-post.h
> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
> # Install manpages manually
> mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/man/man1
> mv doc/interpreter/*.1
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/man/man1
> # Install info pages manually
> mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info
> mv doc/interpreter/*.info*
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info
> # install texi macros
> mkdir -p
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc
> mv doc/interpreter/*.texi
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc
>
> # Install Fink-specific octaverc which points at our oct-versioned
> # package directory, and create the database directory
> cp octaverc
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/m/startup
> mkdir -p
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/var/octave/3.8.2/
>
> # install examples
> mkdir -p
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/doc/examples
> cp -R examples
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/doc/examples
>
> # remove autogenerated freedesktop.org desktop file
> rm -f
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/applications/www.octave.org-octave.desktop
> mkdir -p
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/scripts
>
> # upstream install operation mangles mkoctfile(?), so copy it over
> # from %b manually
> cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/bin
> rm mkoctfile mkoctfile-3.8.2
> /bin/cp
> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/src/mkoctfile
> mkoctfile-3.8.2
> ln -s mkoctfile-3.8.2 mkoctfile
>
> # sanitize .la files
> cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/
> perl -pi -e 's/(\-framework)\s(\w+)/-Wl,$1,$2/g' *.la
>
> # manually install libcxx-fix.h
> if [ -e
> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
> ] ; then
> cp
> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
>
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave/
> fi
> sudo -u fink-bld [ENV] sh -c /tmp/fink.J_KQf
> /usr/bin/install -d -m 700
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac
> /bin/cp -r AUTHORS
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/cp -r BUGS
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/cp -r COPYING
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/cp -r ChangeLog
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/cp -r NEWS
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/cp -r README
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
> /bin/chmod -R go=u-w
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac
> /bin/rm -f /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/info/dir
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/info/dir.old
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info/dir
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info/dir.old
> /bin/rm -rf /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2
> /bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw
> /bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/DEBIAN
> /usr/sbin/chown -R fink-bld:fink-bld
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2
> sudo -u fink-bld [ENV] sh -c /tmp/fink.qRdfr
> /usr/bin/install -d -m 755
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/include
> /bin/mv
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/include/
> /usr/bin/install -d -m 755
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2
> /bin/mv
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/*.la
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
> /bin/mv
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/lib{octave,octinterp}.dylib
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
> /bin/mv
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
> mv: rename
> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib
> to
> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib:
> No such file or directory
> ### execution of /bin/mv failed, exit code 1
> ### execution of /tmp/fink.qRdfr failed, exit code 1
> Removing runtime build-lock...
> Removing build-lock package...
> /sw/bin/dpkg-lockwait -r fink-buildlock-octave-ref-qtmac-3.8.2-2
> (Reading database ... 153089 files and directories currently installed.)
> Removing fink-buildlock-octave-ref-qtmac-3.8.2-2 ...
> Failed: phase installing: octave382-ref-qtmac-dev-3.8.2-2 failed
>
> Before reporting any errors, please run "fink selfupdate" and try again.
> Also try using "fink configure" to set your maximum build jobs to 1 and
> attempt to build the package again.
> If you continue to have issues, please check to see if the FAQ on Fink's
> website solves the problem. If not, ask on one (not both, please) of
> these mailing lists:
>
> The Fink Users List <[email protected]>
> The Fink Beginners List <[email protected]>,
>
> with a carbon copy to the maintainer:
>
> Alexander Hansen <[email protected]>
>
> Note that this is preferable to emailing just the maintainer directly,
> since most fink package maintainers do not have access to all possible
> hardware and software configurations.
>
> Please try to include the complete error message in your report. This
> generally consists of a compiler line starting with e.g. "gcc" or "g++"
> followed by the actual error output from the compiler.
>
> Also include the following system information:
> Package manager version: 0.38.1
> Distribution version: selfupdate-rsync Sun Oct 26 15:28:19 2014, 10.10, x86_64
> Trees: local/main stable/main stable/crypto
> Xcode.app: 6.1
> Xcode command-line tools: 6.1.0.0.1.1413057044
> Max. Fink build jobs: 4
>
> fx:~ lukas$
>
Hmm...
Can I have you check in your octave382-ref-qtmac build directory
(/sw/src/fink.build/octave-ref-qtmac-3.8.2/octave-3.8.2/) as to whether
libgui.dylib actually got built?
Thanks!
--
Alexander Hansen, Ph.D.
Fink User Liaison
My package updates: http://finkakh.wordpress.com/
------------------------------------------------------------------------------
_______________________________________________
Fink-users mailing list
[email protected]
List archive:
http://news.gmane.org/gmane.os.macosx.fink.user
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-users
