On Oct 26, 2014, at 10:10 AM, Lukas Reichlin <lukas.reich...@gmail.com> wrote:
>
>> On 26.10.2014, at 16:52, Alexander Hansen <alexanderk.han...@gmail.com>
>> wrote:
>>
>> On 10/26/14, 8:18 AM, Lukas Reichlin wrote:
>>> Hi Alexander
>>>
>>> After installing octave382-ref successfully with all my packages, I ran
>>> into the problem below while installing the new Octave GUI.
>>>
>>> Best regards,
>>> Lukas
>>>
>>>
>>> Octave successfully built. Now choose from the following:
>>>
>>> ./run-octave - to run in place to test before installing
>>> make check - to run the tests
>>> make install - to install (PREFIX=/sw)
>>>
>>> Makefile:2848: warning: overriding commands for target `check'
>>> Makefile:2410: warning: ignoring old commands for target `check'
>>> make[3]: Nothing to be done for `install-exec-am'.
>>> /sw/bin/gmkdir -p
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/site/m
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/site/api-v49+/m
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/site/m
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/oct/x86_64-apple-darwin
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/oct/api-v49+/x86_64-apple-darwin
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/site/oct/x86_64-apple-darwin
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/site/exec/x86_64-apple-darwin
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/api-v49+/site/exec/x86_64-apple-darwin
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/site/exec/x86_64-apple-darwin
>>> /sw/bin/gmkdir -p
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
>>> /sw/bin/ginstall -c -m 644 config.h
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
>>> /sw/bin/gmkdir -p
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc'
>>> /sw/bin/ginstall -c -m 644 CITATION NEWS config.log
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc'
>>> /sw/bin/gmkdir -p
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
>>> /sw/bin/ginstall -c -m 644 oct-conf-post.h
>>> '/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave'
>>> # Install manpages manually
>>> mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/man/man1
>>> mv doc/interpreter/*.1
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/man/man1
>>> # Install info pages manually
>>> mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info
>>> mv doc/interpreter/*.info*
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info
>>> # install texi macros
>>> mkdir -p
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc
>>> mv doc/interpreter/*.texi
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/etc
>>>
>>> # Install Fink-specific octaverc which points at our oct-versioned
>>> # package directory, and create the database directory
>>> cp octaverc
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/m/startup
>>> mkdir -p
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/var/octave/3.8.2/
>>>
>>> # install examples
>>> mkdir -p
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/doc/examples
>>> cp -R examples
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/doc/examples
>>>
>>> # remove autogenerated freedesktop.org desktop file
>>> rm -f
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/applications/www.octave.org-octave.desktop
>>> mkdir -p
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/octave/3.8.2/scripts
>>>
>>> # upstream install operation mangles mkoctfile(?), so copy it over
>>> # from %b manually
>>> cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/bin
>>> rm mkoctfile mkoctfile-3.8.2
>>> /bin/cp
>>> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/src/mkoctfile
>>> mkoctfile-3.8.2
>>> ln -s mkoctfile-3.8.2 mkoctfile
>>>
>>> # sanitize .la files
>>> cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/
>>> perl -pi -e 's/(\-framework)\s(\w+)/-Wl,$1,$2/g' *.la
>>>
>>> # manually install libcxx-fix.h
>>> if [ -e
>>> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
>>> ] ; then
>>> cp
>>> /sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/liboctave/operators/libcxx-fix.h
>>>
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2/octave/
>>> fi
>>> sudo -u fink-bld [ENV] sh -c /tmp/fink.J_KQf
>>> /usr/bin/install -d -m 700
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac
>>> /bin/cp -r AUTHORS
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/cp -r BUGS
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/cp -r COPYING
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/cp -r ChangeLog
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/cp -r NEWS
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/cp -r README
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac/
>>> /bin/chmod -R go=u-w
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/doc/octave-ref-qtmac
>>> /bin/rm -f /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/info/dir
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/info/dir.old
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info/dir
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/share/info/dir.old
>>> /bin/rm -rf /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2
>>> /bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw
>>> /bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/DEBIAN
>>> /usr/sbin/chown -R fink-bld:fink-bld
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2
>>> sudo -u fink-bld [ENV] sh -c /tmp/fink.qRdfr
>>> /usr/bin/install -d -m 755
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/include
>>> /bin/mv
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/include/octave-3.8.2
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/include/
>>> /usr/bin/install -d -m 755
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2
>>> /bin/mv
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/*.la
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
>>> /bin/mv
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/lib{octave,octinterp}.dylib
>>>
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
>>> /bin/mv
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib
>>>
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/
>>> mv: rename
>>> /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib
>>> to
>>> /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-2/sw/lib/octave/3.8.2/liboctgui.dylib:
>>> No such file or directory
>>> ### execution of /bin/mv failed, exit code 1
>>> ### execution of /tmp/fink.qRdfr failed, exit code 1
>>> Removing runtime build-lock...
>>> Removing build-lock package...
>>> /sw/bin/dpkg-lockwait -r fink-buildlock-octave-ref-qtmac-3.8.2-2
>>> (Reading database ... 153089 files and directories currently installed.)
>>> Removing fink-buildlock-octave-ref-qtmac-3.8.2-2 ...
>>> Failed: phase installing: octave382-ref-qtmac-dev-3.8.2-2 failed
>>>
>>> Before reporting any errors, please run "fink selfupdate" and try again.
>>> Also try using "fink configure" to set your maximum build jobs to 1 and
>>> attempt to build the package again.
>>> If you continue to have issues, please check to see if the FAQ on Fink's
>>> website solves the problem. If not, ask on one (not both, please) of
>>> these mailing lists:
>>>
>>> The Fink Users List <fink-users@lists.sourceforge.net>
>>> The Fink Beginners List <fink-beginn...@lists.sourceforge.net>,
>>>
>>> with a carbon copy to the maintainer:
>>>
>>> Alexander Hansen <alexkhan...@users.sourceforge.net>
>>>
>>> Note that this is preferable to emailing just the maintainer directly,
>>> since most fink package maintainers do not have access to all possible
>>> hardware and software configurations.
>>>
>>> Please try to include the complete error message in your report. This
>>> generally consists of a compiler line starting with e.g. "gcc" or "g++"
>>> followed by the actual error output from the compiler.
>>>
>>> Also include the following system information:
>>> Package manager version: 0.38.1
>>> Distribution version: selfupdate-rsync Sun Oct 26 15:28:19 2014, 10.10,
>>> x86_64
>>> Trees: local/main stable/main stable/crypto
>>> Xcode.app: 6.1
>>> Xcode command-line tools: 6.1.0.0.1.1413057044
>>> Max. Fink build jobs: 4
>>>
>>> fx:~ lukas$
>>>
>>
>> Hmm...
>>
>> Can I have you check in your octave382-ref-qtmac build directory
>> (/sw/src/fink.build/octave-ref-qtmac-3.8.2/octave-3.8.2/) as to whether
>> libgui.dylib actually got built?
>>
>> Thanks!
>> --
>> Alexander Hansen, Ph.D.
>> Fink User Liaison
>> My package updates: http://finkakh.wordpress.com/
>
> There's a folder "libgui" inside
> "/sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/", but no dylib.
>
> Best regards,
> Lukas
>
>
Drat. It must have misbuilt. I’ll take a look.
------------------------------------------------------------------------------
_______________________________________________
Fink-users mailing list
Fink-users@lists.sourceforge.net
List archive:
http://news.gmane.org/gmane.os.macosx.fink.user
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-users
