> On 27.10.2014, at 01:59, Alexander Hansen <[email protected]> wrote:
>
> On 10/26/14, 10:15 AM, Alexander Hansen wrote:
>>
>
>>> There's a folder "libgui" inside
>>> "/sw/src/fink.build/octave-ref-qtmac-3.8.2-2/octave-3.8.2/", but no dylib.
>>>
>>> Best regards,
>>> Lukas
>>>
>>>
>>
>> Drat. It must have misbuilt. I’ll take a look.
>>
>
> It seems to work OK on 10.9. My 10.10 environment isn't well-populated with
> packages yet, so it will take a bit of time for me to get all of the
> dependencies built up so that I can try to see what's going on there and
> compare with 10.9.
>
> --
> Alexander Hansen, Ph.D.
> Fink User Liaison
> My package updates: http://finkakh.wordpress.com/
Please find below the results from revision 3. There was an update for gcc49 as
well.
Best regards,
Lukas
Octave successfully built. Now choose from the following:
./run-octave - to run in place to test before installing
make check - to run the tests
make install - to install (PREFIX=/sw)
Makefile:2848: warning: overriding commands for target `check'
Makefile:2410: warning: ignoring old commands for target `check'
make[3]: Nothing to be done for `install-exec-am'.
/sw/bin/gmkdir -p
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/site/m
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/site/api-v49+/m
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/site/m
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/site/oct/x86_64-apple-darwin
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/site/oct/api-v49+/x86_64-apple-darwin
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/site/oct/x86_64-apple-darwin
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/site/exec/x86_64-apple-darwin
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/api-v49+/site/exec/x86_64-apple-darwin
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/site/exec/x86_64-apple-darwin
/sw/bin/gmkdir -p
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2/octave'
/sw/bin/ginstall -c -m 644 config.h
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2/octave'
/sw/bin/gmkdir -p
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/etc'
/sw/bin/ginstall -c -m 644 CITATION NEWS config.log
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/etc'
/sw/bin/gmkdir -p
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2/octave'
/sw/bin/ginstall -c -m 644 oct-conf-post.h
'/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2/octave'
# Install manpages manually
mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/man/man1
mv doc/interpreter/*.1
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/man/man1
# Install info pages manually
mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/info
mv doc/interpreter/*.info*
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/info
# install texi macros
mkdir -p
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/etc
mv doc/interpreter/*.texi
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/etc
# Install Fink-specific octaverc which points at our oct-versioned
# package directory, and create the database directory
cp octaverc
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/m/startup
mkdir -p /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/var/octave/3.8.2/
# install examples
mkdir -p
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/doc/examples
cp -R examples
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/doc/examples
# remove autogenerated freedesktop.org desktop file
rm -f
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/applications/www.octave.org-octave.desktop
mkdir -p
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/octave/3.8.2/scripts
# upstream install operation mangles mkoctfile(?), so copy it over
# from %b manually
cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/bin
rm mkoctfile mkoctfile-3.8.2
/bin/cp /sw/src/fink.build/octave-ref-qtmac-3.8.2-3/octave-3.8.2/src/mkoctfile
mkoctfile-3.8.2
ln -s mkoctfile-3.8.2 mkoctfile
# sanitize .la files
cd /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/
perl -pi -e 's/(\-framework)\s(\w+)/-Wl,$1,$2/g' *.la
# manually install libcxx-fix.h
if [ -e
/sw/src/fink.build/octave-ref-qtmac-3.8.2-3/octave-3.8.2/liboctave/operators/libcxx-fix.h
] ; then
cp
/sw/src/fink.build/octave-ref-qtmac-3.8.2-3/octave-3.8.2/liboctave/operators/libcxx-fix.h
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2/octave/
fi
sudo -u fink-bld [ENV] sh -c /tmp/fink.Ykq2V
/usr/bin/install -d -m 700
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac
/bin/cp -r AUTHORS
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/cp -r BUGS
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/cp -r COPYING
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/cp -r ChangeLog
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/cp -r NEWS
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/cp -r README
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac/
/bin/chmod -R go=u-w
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/doc/octave-ref-qtmac
/bin/rm -f /sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/info/dir
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/info/dir.old
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/info/dir
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/share/info/dir.old
/bin/rm -rf /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3
/bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw
/bin/mkdir -p /sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/DEBIAN
/usr/sbin/chown -R fink-bld:fink-bld
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3
sudo -u fink-bld [ENV] sh -c /tmp/fink.EVavC
/usr/bin/install -d -m 755
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/include
/bin/mv
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/include/octave-3.8.2
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/include/
/usr/bin/install -d -m 755
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/lib/octave/3.8.2
/bin/mv
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/*.la
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/lib/octave/3.8.2/
/bin/mv
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/lib{octave,octinterp}.dylib
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/lib/octave/3.8.2/
/bin/mv
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/liboctgui.dylib
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/lib/octave/3.8.2/
mv: rename
/sw/src/fink.build/root-octave-ref-qtmac-3.8.2-3/sw/lib/octave/3.8.2/liboctgui.dylib
to
/sw/src/fink.build/root-octave382-ref-qtmac-dev-3.8.2-3/sw/lib/octave/3.8.2/liboctgui.dylib:
No such file or directory
### execution of /bin/mv failed, exit code 1
### execution of /tmp/fink.EVavC failed, exit code 1
Removing runtime build-lock...
Removing build-lock package...
/sw/bin/dpkg-lockwait -r fink-buildlock-octave-ref-qtmac-3.8.2-3
(Reading database ... 153091 files and directories currently installed.)
Removing fink-buildlock-octave-ref-qtmac-3.8.2-3 ...
Failed: phase installing: octave382-ref-qtmac-dev-3.8.2-3 failed
Before reporting any errors, please run "fink selfupdate" and try again.
Also try using "fink configure" to set your maximum build jobs to 1 and
attempt to build the package again.
If you continue to have issues, please check to see if the FAQ on Fink's
website solves the problem. If not, ask on one (not both, please) of
these mailing lists:
The Fink Users List <[email protected]>
The Fink Beginners List <[email protected]>,
with a carbon copy to the maintainer:
Alexander Hansen <[email protected]>
Note that this is preferable to emailing just the maintainer directly,
since most fink package maintainers do not have access to all possible
hardware and software configurations.
Please try to include the complete error message in your report. This
generally consists of a compiler line starting with e.g. "gcc" or "g++"
followed by the actual error output from the compiler.
Also include the following system information:
Package manager version: 0.38.1
Distribution version: selfupdate-rsync Mon Oct 27 05:14:31 2014, 10.10, x86_64
Trees: local/main stable/main stable/crypto
Xcode.app: 6.1
Xcode command-line tools: 6.1.0.0.1.1413057044
Max. Fink build jobs: 4
fx:~ lukas$
------------------------------------------------------------------------------
_______________________________________________
Fink-users mailing list
[email protected]
List archive:
http://news.gmane.org/gmane.os.macosx.fink.user
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-users
