Open a shell prompt on the console and run the /sbin/tfadmin newlvl
SYS_PRIVATE. Then su to root. You have to do this at the console.
Once at the root # prompt, type the following as ONE LINE of text (it is
case sensitive), (reboot afterwards):
putdev -mtcp_subdev range=SYS_RANGE_MAX-SYS_RANGE_MIN
startuplvl=USER_LOGIN
Additionally, its a good idea to verify that all of your FSO operators
are set to password for the internal method of authentication and
DISABLED for external. Finally, make sure your root password is
completely jacked up, (i.e. f&3g7#ds). This will further ensure that
the password will not be compromised.
Good Luck,
David Markle
-----Original Message-----
From: ramin(a)iwn.com.au
Sent: Thursday, February 25, 1999 4:29 PM
To: Markle, David
Subject: RE: Cyberguard Firewall setup
Hi David,
That is exactly what I do. To give you more information I send you
the exact error I am getting.
UX:in.login: INFO: Current Level: network
Last login: Thu Feb 25 16:27:12 1999 on pts002 at level NETWORK
UX:sh (upuser): ERROR: /home/ramin/.UpgradeVer2.1.3: Cannot create
$ /sbin/tfadmin newlvl SYS_PRIVATE
lvlproc: Permission denied
/usr/sbin/newlvl: Set Level failed
Returning current level to: NETWORK
I would appreciate If you could send me the command that you enter
from shell prompt as root.
Regards
Ramin
-----Original Message-----
From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Sent: Friday, February 26, 1999 2:19 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: Cyberguard Firewall setup
Once you authenticate, you are at the NETWORK level. To change to
the
SYS_PRIVATE, type the following:
/sbin/tfadmin newlvl SYS_PRIVATE
IF this fails, (remotely), there is a LARGE string that needs entered
as
root at the console. If you need this command, let me know.
dm
-----Original Message-----
From: firewalls-owner(a)lists.gnac.net
Sent: Wednesday, February 24, 1999 10:31 PM
To: Firewalls(a)lists.gnac.net
Cc: ramin(a)iwn.com.au
Subject: Cyberguard Firewall setup
Hi,
Does anyone who uses Cyberguard firewall (Unixware version) know
how
to setup the application to enable me to change to SYS_PRIVATE
level
after opening a telnet session to firewall? At the moment I can
telnet to firewall from internal network but after connection I
can't
change the level from NETWORK to SYS_PRIVATE.
Any help would be GREATLY appreciated.
Ramin
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
<< File: UnXhrds.txt >>
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
