sounds like you wanna use a vlan on the switch or you could use a
crossover cable. you won't be able to plug a server directly into the
card using a standard cable.
On Wed, 5 Jul 2000, Rob Serfozo wrote:
> I hope that this group will help with what I am sure is a very basic
> question. We have a Cisco Pix 515, that was installed and setup by a third
> party. They configured it to support our webserver on a DMZ using the PIX 4
> port Ethernet card. They told us to plug the server directly into the 1st
> port of the 4 port card. When we do this we get nothing, no light
> indicating connection, no connectivity, nothing. We have tested the port
> with a network tester and get a green light indicating link. No my question
> is, are we suppose to do as described above, which would indicate another
> problem. Or should we connect the DMZ and webserver to our switch. The
> server is 192.168.1.2 and the DMZ port is 192.168.1.1.
>
> Thanks for any help.
> Rob Serfozo
>
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
>
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
