Am Freitag, den 01.04.2011, 14:33 +0200 schrieb Stefan Tauner:
> Signed-off-by: Stefan Tauner <[email protected]>
> ---
>  ichspi.c |    8 ++++++--
>  1 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/ichspi.c b/ichspi.c
> index 0b9db20..4e303d7 100644
> --- a/ichspi.c
> +++ b/ichspi.c
> @@ -62,6 +62,9 @@
>  #define SSFC_SCF             0x01000000
>  #define SSFC_SCF_20MHZ 0x00000000
>  #define SSFC_SCF_33MHZ 0x01000000
> +/* We combine SSFS and SSFC to one lword,
> + * therefore SSFC bits are off by 8.
> + * This bits are reserved SSFC: 23-19,7,0; SSFS: 5-7. */

»These bits …« or »The following bits are …«.

>  #define SSFC_RESERVED_MASK   0xf8008100
>  
>  #define ICH9_REG_FADDR               0x08    /* 32 Bits */
> @@ -116,7 +119,7 @@ static void *ich_spibar = NULL;
>  typedef struct _OPCODE {
>       uint8_t opcode;         //This commands spi opcode
>       uint8_t spi_type;       //This commands spi type
> -     uint8_t atomic;         //Use preop: (0: none, 1: preop0, 2: preop1
> +     uint8_t atomic;         //Use preop: (0: none, 1: preop0 only, 2: both)

Also put space a after the comment characters `//`?

>  } OPCODE;
>  
>  /* Suggested opcode definition:
> @@ -679,7 +682,7 @@ static int ich9_run_opcode(OPCODE op, uint32_t offset,
>  
>       /* Assemble SSFS + SSFC */
>       temp32 = REGREAD32(ICH9_REG_SSFS);
> -     /* keep reserved bits */
> +     /* Keep reserved bits only */
>       temp32 &= SSFS_RESERVED_MASK | SSFC_RESERVED_MASK;
>       /* clear error status registers */
>       temp32 |= (SSFS_CDS + SSFS_FCERR);
> @@ -688,6 +691,7 @@ static int ich9_run_opcode(OPCODE op, uint32_t offset,
>       /* Use 20 MHz */
>       temp32 |= SSFC_SCF_20MHZ;
>  
> +     /* Set data byte count (DBC) and data cycle bit (DS) */

I do not know if the common rule is to add full stops at the end of
sentences or not.

>       if (datalength != 0) {
>               uint32_t datatemp;
>               temp32 |= SSFC_DS;


Thanks,

Paul

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to