Am 09.02.2012 18:40 schrieb Stefan Tauner: > From: Stefan Tauner <[email protected]> > Date: Thu, 9 Feb 2012 16:09:31 +0100 > Subject: [PATCH] Add support for SFDP (JESD216). > > Similar to modules using the opaque programmer framework (e.g. ICH Hardware > Sequencing) this uses a template struct flashchip element in flashchips.c with > a special probe function that fills the obtained values into that struct. > > This allows yet unknown SPI chips to be supported (read, erase, write) almost > as if it was already added to flashchips.c. > > Documentation used: > http://www.jedec.org/standards-documents/docs/jesd216 (2011-04) > W25Q32BV data sheet Revision F (2011-04-01) > EN25QH16 data sheet Revision F (2011-06-01) > MX25L6436E data sheet Revision 1.8 (2011-12-26) > > Tested-by: David Hendricks <[email protected]> > on W25Q64CV + dediprog > Tested-by: Stefan Tauner <[email protected]> > on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + > serprog > > Signed-off-by: Stefan Tauner <[email protected]>
With the following conditions: - two fixup patches later in this thread integrated - unkown->unknown fixes - NPH formatting as discussed on IRC - spi_sfdp_read naming as dicusssed on IRC this patch is Acked-by: Carl-Daniel Hailfinger <[email protected]> would be nice to have one consolidated patch on the mailing list, just for the record. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
