Greetings,
I have been running 2.0.5 since I got my 1500 last summer. It was
working fine this morning, then I decided for some strange reason to
upgrade to 2.0.16.
I downloaded the update from the main Flex page, and followed the
install instructions.
PSDR starts up fine, but no indication of any receive activity. Signal
meter shows -240dBm. Changing the antenna selection has no effect. I'm
injecting -70dBm into the XVRX port from my HP8640, so I was expecting
to see something. Virgin database, default settings of WWV, 10MHz LSB,
0db preamp. Changing mode has no effect, changing bands varies the
signal reading as the preamp selection changes; at 30dB preamp the
signal meter drops to -270dBm.
Toshiba L505 laptop, i3 + 4GB, Win 7/64.
Device Manager shows F1500 SDR driver 10.1.1.0, USB Kernel driver 10.2.1.0.
The big problem is that I don't seem to have a way of going back to
2.0.5. I even uninstalled both drivers and downloaded 2.0.8 from the
Flex page but that won't run either. Device Manager/ Other devices/
FLEX-1500 says "The drivers for this device are not installed. (Code 28)"
I really would like to get this back in service driving my transverters
before the Jan VHF contest. My F3K is at 1.18.6 on a different computer
and is working wonderfully; I don't think I'll risk trying the Beta
version on that one.
Any comments / suggestions gratefully received.
73 Alf NU8I
Scottsdale AZ DM43an
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
