Hello, First; I don't get the High SWR problem when X2TR is on or off in 2.0.16. (Think I had it earlier.) But I do have strange choppy audio from time to time. I run an 2.0GHz old computer with a 128MB video-ram. Very low DPC and about 50% CPU used with panadapter on. But this didn't happen in the older alpha versions of PB, not as much as in 2.0.16 I think. But turning off the panadapter helps a lot. Something must have happend with the code. :-) I must stick to 1.18.6 on this computer I see.
73 LA4WAA, Stig -----Opprinnelig melding----- Fra: Edwin Marzan [mailto:[email protected]] Sendt: 12. januar 2011 23:35 Til: [email protected]; [email protected] Emne: Re: [FlexEdge] Fwd: SDR-1000 V2.0.16 Hi SWR 2.0.16 requires a more powerful computer. I'm running a similar setup to yours and it runs great. When I try 2.0.16 the audio gets a little choppy at times. Try turning off the panadaptor as a test and you'll see it runs better. Our beautiful Panadaptor and the skins associated with it require more memory and processing power, unfortunately. Hope this helps Edwin Marzan AB2VW > Date: Wed, 12 Jan 2011 11:25:25 -0600 > From: [email protected] > To: [email protected] > Subject: [FlexEdge] Fwd: SDR-1000 V2.0.16 Hi SWR > > Forgot to mention, parallel cable direct to computer. also have 100 w. p.a. > > 73, Carl N9GC > > -------- Original Message -------- > Subject: SDR-1000 V2.0.16 Hi SWR > Date: Wed, 12 Jan 2011 11:23:58 -0600 > From: Carl N9GC <[email protected]> > To: > > > > Setup: > > SDR1000 > FA66 > Dell Pentium 4 2.80 GHZ > 768 Mb Ram > WinXP SP3 > > Under v. 1.18.6 no problem. Tunes just fine as seen on monitor and on > MFJ993 display > Under v. 2.0.16 HI SWR shows, no power output. > Also under 2.0.16 I get very choppy audio, not the case on V1.18.6 where > audio is fine. > > Hope this helps. > > 73, Carl N9GC > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
