The Flex-1500 is specified as a sine wave input at a level of "0 to +15 dBm"
I've been looking at GPSDOs myself very recently (like today), and have just about settled on getting a Fury. You chose a Rb standard, you said. I thought Rb was good in terms of stability, but isn't the phase noise an issue?? Peter K1PGV -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Vandenberg Sent: Tuesday, May 31, 2011 7:09 PM To: [email protected]; [email protected] Subject: [FlexEdge] External frequency standard Picked up in Dayton a Rubidium Atomic frequency standard and need to hook it up. My F5K user manual specifies the level of the input signal, but not the type. 1. What is recommended Squarwave or Sinus? 2. What is the impedance of the F5K input? 3. Beside the F5K have a Flex-1500. What is the recommended way of hooking both Flex radios up at the same time? 4. What are other users using for the 24V 2A PS? On the last item I was thinking of reworking a 12V PS with a voltage doubler. Wonder wat others have done. 73, John ve3dvv _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
