Do this first. Go into your VSP manager and delete all of the com port pairs. Then delete the virtual comport software. Reboot and re-install the virtual comport software and redefine the pairs. The problem is that PowerSDR is getting the com port list from windows and somethin in it is hosed up.
On Wed, Jun 29, 2011 at 1:48 PM, Erik Jakobsen <[email protected]> wrote: > ** > Of course I did Tim. > > As said earlier, I deleted ALL db's in 2.0.22 > > Started up, and nothing wrong until I would enable the CAT port. > > Same with PowerSDR v2.1 RC3, and the same issue. > > That SOULD be ok with ref. to the db's. > What say. > > Must be something common, and maybe I should try recover the Windows 7 > 32bit. > > /Erik > > > > But did you use a clean default database to test with? I believe there > is something in your DB cause this problem.**** > > ** ** > > ** ** > > -Tim**** > > ** ** > > *From:* Erik Jakobsen [mailto:[email protected] <[email protected]>] > *Sent:* Wednesday, June 29, 2011 12:18 PM > *To:* Tim Ellison > *Cc:* [email protected] > *Subject:* Re: [FlexEdge] BitBang**** > > ** ** > > I installed PowerSDR v2.1 RC3, and got the same. > > Erik > > > **** > > What radio are you using?**** > > ** ** > > Are you using DDUtil?**** > > ** ** > > Something did not enumerate the virtual com ports correctly.**** > > ** ** > > -Tim**** > > ** ** > > ** ** > > -----Original Message-----**** > > From: [email protected]**** > > [mailto:[email protected] <[email protected]>] On > Behalf Of Erik Jakobsen**** > > Sent: Wednesday, June 29, 2011 4:34 AM**** > > To: [email protected]**** > > Subject: [FlexEdge] BitBang**** > > ** ** > > Hi.**** > > ** ** > > I get the following, when I start up PSDR 2.0.22.**** > > ** ** > > http://www.urbakken.dk/BitBang.jpg**** > > http://www.urbakken.dk/cat.jpg**** > > ** ** > > VSPmgt lookes like this:**** > > ** ** > > http://www.urbakken.dk/vspmgr.jpg**** > > ** ** > > Is BitBang something with not using a real com port ?.**** > > ** ** > > If so, why is it comming up.**** > > ** ** > > What to do ?**** > > ** ** > > --**** > > Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the**** > > callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with**** > > http://counter.li.org**** > > ** ** > > ** ** > > _______________________________________________**** > > Flexedge mailing list**** > > [email protected]**** > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz**** > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used**** > > for posting topics related to SDR software development and experimentalist**** > > who are using beta versions of the software.**** > > ** ** > > > > > **** > > -- **** > > Venlig hilsen - Best regards - Erik Jakobsen**** > > Licensed HAM-RADIO with the callsign OZ4KK**** > > http://www.urbakken.dk**** > > Registered Linux user #114875 with http://counter.li.org**** > > > > -- > Venlig hilsen - Best regards - Erik Jakobsen > Licensed HAM-RADIO with the callsign OZ4KK > http://www.urbakken.dk > Registered Linux user #114875 with http://counter.li.org > > -- -Tim _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
