Thank you Tim.
This receipt was what I did yesterday, and in the first run it worked ok.
Then today I recognized the mentioned issues.
I will do the trick once more, and see if that helps.
/Erik
Do this first. Go into your VSP manager and delete all of the com
port pairs. Then delete the virtual comport software. Reboot and
re-install the virtual comport software and redefine the pairs. The
problem is that PowerSDR is getting the com port list from windows and
somethin in it is hosed up.
On Wed, Jun 29, 2011 at 1:48 PM, Erik Jakobsen <[email protected]
<mailto:[email protected]>> wrote:
Of course I did Tim.
As said earlier, I deleted ALL db's in 2.0.22
Started up, and nothing wrong until I would enable the CAT port.
Same with PowerSDR v2.1 RC3, and the same issue.
That SOULD be ok with ref. to the db's.
What say.
Must be something common, and maybe I should try recover the
Windows 7 32bit.
/Erik
But did you use a clean default database to test with? I believe
there is something in your DB cause this problem.
-Tim
*From:*Erik Jakobsen [mailto:[email protected]]
*Sent:* Wednesday, June 29, 2011 12:18 PM
*To:* Tim Ellison
*Cc:* [email protected] <mailto:[email protected]>
*Subject:* Re: [FlexEdge] BitBang
I installed PowerSDR v2.1 RC3, and got the same.
Erik
What radio are you using?
Are you using DDUtil?
Something did not enumerate the virtual com ports correctly.
-Tim
-----Original Message-----
From:[email protected]
<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Erik Jakobsen
Sent: Wednesday, June 29, 2011 4:34 AM
To:[email protected] <mailto:[email protected]>
Subject: [FlexEdge] BitBang
Hi.
I get the following, when I start up PSDR 2.0.22.
http://www.urbakken.dk/BitBang.jpg
http://www.urbakken.dk/cat.jpg
VSPmgt lookes like this:
http://www.urbakken.dk/vspmgr.jpg
Is BitBang something with not using a real com port ?.
If so, why is it comming up.
What to do ?
--
Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the
callsign OZ4KKhttp://www.urbakken.dk Registered Linux user #114875 with
http://counter.li.org
_______________________________________________
Flexedge mailing list
[email protected] <mailto:[email protected]>
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
--
Venlig hilsen - Best regards - Erik Jakobsen
Licensed HAM-RADIO with the callsign OZ4KK
http://www.urbakken.dk
Registered Linux user #114875 withhttp://counter.li.org
--
Venlig hilsen - Best regards - Erik Jakobsen
Licensed HAM-RADIO with the callsign OZ4KK
http://www.urbakken.dk Registered Linux user #114875 with
http://counter.li.org
--
-Tim
--
Venlig hilsen - Best regards - Erik Jakobsen
Licensed HAM-RADIO with the callsign OZ4KK
http://www.urbakken.dk
Registered Linux user #114875 with http://counter.li.org
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
