I'll bet they are using rigctl and that code only supports 8 com ports. Same as wspr and jt65.
Mike va3mw On Dec 27, 2012, at 9:23 PM, Tim Ellison <[email protected]> wrote: > You should report this as a bug/oversight to the FreeDV developers. There > are 256 available com ports under Windows. Seems sort of short sighted to > only allow 2.7% of them to be addressable by their software. :-) > > Tim Ellison > On 12/27/2012 9:07 PM, Mike Heitmann wrote: >> All, >> >> PTT is now working with my Flex-3000 and Flex-1500. I use VSP Manager from >> K5FR. >> In my case, FreeDV did not like the high numbered COM ports I had selected >> for >> PTT control. Specifiying a COM port number higher than COM7 at the FreeDV >> end of >> the pair did not work. I ended up using COM7 <--> COM37. FreeDV now is >> happily >> asserting COM7 DTR (inverted) for PTT, and PowerSDR is looking for PTT on >> COM37 >> DTR. Previously I was trying to use COM13 <--> COM33. >> >> Mike, N0SO >> >> >> ----- Original Message ---- >> From: Mel Whitten <[email protected]> >> To: [email protected] >> Sent: Sun, December 23, 2012 12:44:04 PM >> Subject: Re: [FlexEdge] PTT and FreeDV >> >> Thanks for your input. Yes, your setting in Flex CAT is correct, just as I >> have >> mine. :-) The whole PTT issue and others are being worked. Look for >> changes >> in forthcoming releases. >> Mel >> >> ----- Original Message ----- From: "Jim A. KJ7S" <[email protected]> >> To: <[email protected]> >> Sent: Sunday, December 23, 2012 10:41 AM >> Subject: [FlexEdge] PTT and FreeDV >> >> >>> One of the things I noticed when I set mine up was....picking the Guru's >>> brain >>> a bit....on the PTT selection you want to make sure that, if you selected >>> both >>> RTS and DTR in the PSDR form, you unselect the DTR, otherwise you will >>> stick it >>> in txmit. In my PSDR CAT Control Tab, the PTT Control has The RTS block >>> checked >>> and the DTR block unchecked. Jim >>> >>> >>> ------------------------------ >>> >>> Message: 8 >>> Date: Sat, 22 Dec 2012 08:44:13 -0600 >>> From: "Mel Whitten"<[email protected]> >>> To: "FlexEdge"<[email protected]> >>> Subject: Re: [FlexEdge] How to setup the radio for Digital Voice >>> Message-ID: <C99C5813AAB64D269FCFE8A074F766F1@DELL530> >>> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; >>> reply-type=original >>> >>> I have worked at least 15 Flex radio users running FreeDV who had no trouble >>> with PTT. Four of the alpha testers use Flex radios. Just select the VAC >>> port and click on RTS = +V. I would highly recommend watching the quick >>> start video on FreeDV setup authored by a Flex 5ka user. >>> >>> Mel >>> k0pfx >>> >>> >>> >>> -- This message has been scanned for viruses and >>> dangerous content by MailScanner, and is >>> believed to be clean. >>> >>> >>> _______________________________________________ >>> Flexedge mailing list >>> [email protected] >>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >>> for >>> posting topics related to SDR software innovation and other technical SDR >>> topics. >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >> for >> posting topics related to SDR software innovation and other technical SDR >> topics. >> >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >> for posting topics related to SDR software innovation and other technical >> SDR topics. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software innovation and other technical SDR > topics. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
