The mystery is solved. I have not seen any on mention this on the Free DV reflector Only people that kept saying "I have a flex and it works fine" Thanks for the info. 73, Tom K2BEW
On Thu, Dec 27, 2012 at 9:55 PM, Mike va3mw <[email protected]> wrote: > I'll bet they are using rigctl and that code only supports 8 com ports. > > Same as wspr and jt65. > > Mike va3mw > > On Dec 27, 2012, at 9:23 PM, Tim Ellison <[email protected]> wrote: > > > You should report this as a bug/oversight to the FreeDV developers. > There are 256 available com ports under Windows. Seems sort of short > sighted to only allow 2.7% of them to be addressable by their software. :-) > > > > Tim Ellison > > On 12/27/2012 9:07 PM, Mike Heitmann wrote: > >> All, > >> > >> PTT is now working with my Flex-3000 and Flex-1500. I use VSP Manager > from K5FR. > >> In my case, FreeDV did not like the high numbered COM ports I had > selected for > >> PTT control. Specifiying a COM port number higher than COM7 at the > FreeDV end of > >> the pair did not work. I ended up using COM7 <--> COM37. FreeDV now is > happily > >> asserting COM7 DTR (inverted) for PTT, and PowerSDR is looking for PTT > on COM37 > >> DTR. Previously I was trying to use COM13 <--> COM33. > >> > >> Mike, N0SO > >> > >> > >> ----- Original Message ---- > >> From: Mel Whitten <[email protected]> > >> To: [email protected] > >> Sent: Sun, December 23, 2012 12:44:04 PM > >> Subject: Re: [FlexEdge] PTT and FreeDV > >> > >> Thanks for your input. Yes, your setting in Flex CAT is correct, just > as I have > >> mine. :-) The whole PTT issue and others are being worked. Look for > changes > >> in forthcoming releases. > >> Mel > >> > >> ----- Original Message ----- From: "Jim A. KJ7S" <[email protected]> > >> To: <[email protected]> > >> Sent: Sunday, December 23, 2012 10:41 AM > >> Subject: [FlexEdge] PTT and FreeDV > >> > >> > >>> One of the things I noticed when I set mine up was....picking the > Guru's brain > >>> a bit....on the PTT selection you want to make sure that, if you > selected both > >>> RTS and DTR in the PSDR form, you unselect the DTR, otherwise you > will stick it > >>> in txmit. In my PSDR CAT Control Tab, the PTT Control has The RTS > block checked > >>> and the DTR block unchecked. Jim > >>> > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
