If its not the SR being on, there is a process to fine tune the freq with CWS.
73 Greg On 4/25/13, Edward H Russell <[email protected]> wrote: > Andy, > > Make sure you have SR (Spur Reduction) off. That would make a displacement > between the frequencies on PowerSDR and Skimmer. Otherwise I don't know > what > the problem might be. I don't think it could be a VAC problem. > > 73, Ed > W2RF > > -----Original Message----- > From: Flexedge [mailto:[email protected]] On Behalf Of Andrew > O'Brien > Sent: Wednesday, April 24, 2013 9:50 PM > To: [email protected] > Subject: [FlexEdge] PowerSDR and CW Skimmer not aligned > > I have got PowerSDR and CW Skimmer working together, the frequency > displayed > in PowerSDR is the same frequency in the main display of CW Skimmer. > However a CW signal nicely centered in PowerSDR does not show in the CW > Skimmer waterfall at all. CW signal DO show in Skimmer's waterfall, but > not ones heard in PowerSDR's audio. When CW Skimmer lists a CQ call in > Call > List, it is about 20 Khz off from PowerSDR. I Googled this issue and found > some folks with similar issues in 2011. VAC settings were suspect at that > time but I did not see a solution , some said the issue went away when VAC > was updated to a new version. I am using the latest version and have VAC > set up identical to the Flex Knowledge Base screenshots on using CW > Skimmer. > I note with interest the fact that CW Skimmer has a Frequency Calibration > option that is grayed out when I use PowerSDR. . > > Anyone have an idea or two on where to start? > > Andy K3UK > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software innovation and other technical > SDR topics. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software innovation and other technical > SDR topics. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
