Well, whatever I did , it worked fine this weekend with the huge audio frequency adjustment. I can find Skimmer spots exactly on PowerSDR frequency. I am surprised about the many different web links with suggested settings and many totally contradictory. Andy K3UK
On Sun, May 12, 2013 at 2:02 PM, bill <[email protected]> wrote: > I've used CWSkimmer for a long time. > CWSkimmer settings > Softrock-IF > CW Pitch 600Hz > Audio IF 9600 > Sampling Rate of 192kHz > WDM Sound Driver > Left/Right = I/Q > and of course PSDR 'SR' is disabled. > > Whether Dxing of Contesting I find clicking on a PSDR panadaptor or the > CWSkimmer waterfall to put me on the station I wish to call. > > > > On 2013-05-11 7:55 PM, Edward H Russell wrote: > >> It is working perfectly here with the 5k. Don't know what's up with the >> 1500. >> >> >> >> From: Andrew O'Brien [mailto:[email protected]] >> Sent: Saturday, May 11, 2013 8:53 PM >> To: Edward H Russell >> Subject: Re: [FlexEdge] PowerSDR and CW Skimmer not aligned >> >> >> Thanks, my main interest is in a 5000 which I will buy in a few weeks, >> using >> a loaner 1500 at the moment. I will certainly want CW Skimmer to function >> well with a 5000. >> >> Andy K3UJ >> >> >> On Sat, May 11, 2013 at 8:43 PM, Edward H Russell <[email protected]> wrote: >> >> Andy, >> >> I just did a test here and with the 5k and 2.6.4 I had to set the IF to >> 8400 >> to get synchronized. Not sure what is going on here, this is new. Will be >> testing further tomorrow. Thanks for bringing this up and sorry you had to >> beat your head against it :) >> >> >> 73, Ed >> W2RF >> >> -----Original Message----- >> From: Flexedge >> [mailto:flexedge-bounces@flex-**radio.biz<[email protected]>] >> On Behalf Of Andrew >> O'Brien >> >> Sent: Saturday, May 11, 2013 8:05 PM >> To: [email protected]; SkimmerTalk Reflector >> Subject: Re: [FlexEdge] PowerSDR and CW Skimmer not aligned >> >> Returning to this topic after a week break to rest my brain. I tampered >> with the "IF audio" setting in CW Skimmer. After trial and error, I now >> have CW Skimmer and PowerSDR aligned , the IF Audio setting that works is >> 4500 Hz instead of 9600 Hz. I have no idea why, nor any idea what issues >> changing it will cause, but my skims are aligned now. >> Andy K3UK >> >> >> On Wed, Apr 24, 2013 at 9:49 PM, Andrew O'Brien <[email protected]> >> wrote: >> >> I have got PowerSDR and CW Skimmer working together, the frequency >>> displayed in PowerSDR is the same frequency in the main display of CW >>> Skimmer. However a CW signal nicely centered in PowerSDR does not >>> show in the CW Skimmer waterfall at all. CW signal DO show in >>> Skimmer's waterfall, but not ones heard in PowerSDR's audio. When CW >>> Skimmer lists a CQ call in Call List, it is about 20 Khz off from >>> PowerSDR. I Googled this issue and found some folks with similar >>> issues in 2011. VAC settings were suspect at that time but I did not >>> see a solution , some said the issue went away when VAC was updated to >>> a new version. I am using the latest version and have VAC set up >>> identical to the Flex Knowledge Base screenshots on using CW Skimmer. >>> I note with interest the fact that CW Skimmer has a Frequency >>> Calibration option that is grayed out when I use PowerSDR. . >>> >>> Anyone have an idea or two on where to start? >>> >>> Andy K3UK >>> >>> ______________________________**_________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used >> for posting topics related to SDR software innovation and other technical >> SDR topics. >> >> >> ______________________________**_________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software innovation and other >> technical SDR topics. >> >> > -- > > BAD idea: Using a flame test for hydrogen > --------------------------- > W9OL-Bill H. in Chicagoland > webcams at > http://w9ol-towercam.webhop.**org:8080<http://w9ol-towercam.webhop.org:8080> > My weatherpage at > http://home.comcast.net/~w9ol/**WX/HH.htm<http://home.comcast.net/~w9ol/WX/HH.htm> > > > ______________________________**_________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
