While this may be obvious to some, since
it was not said explicitly, I will say it: Please do NOT ship the enclosure
with the stack. Ship the 4 board stack only. Thanks.
Eric Wachsmann
FlexRadio Systems
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gerald Youngblood
Sent: Thursday, September 08, 2005
6:21 PM
To: Richard Kronick; MailFlexRadio
Subject: Re: [Flexradio] High
Dynamic Range Upgrade Now Available forSDR-1000
I am addressing this to
the reflector because it is a very good question for all. The lowest cost
way to do this is to return the stack intact. That will keep shipping
costs down but will let us test the entire stack as a unit after modification.
The stack weighs just under 1 lb as I recall.
-----Original
Message-----
From: Richard Kronick
[mailto:[EMAIL PROTECTED]
Sent: Thursday, September 08, 2005
6:16 PM
To: Gerald Youngblood
Subject: Re: [Flexradio] High
Dynamic Range Upgrade Now Available for SDR-1000
PS My question should have been. Do
we send in the whole stack, the stack still installed in the enclosure, or
just the BPF and RFE boards for the factory mod?
----- Original Message -----
Sent: Thursday,
September 08, 2005 7:03 PM
Subject: [Flexradio]
High Dynamic Range Upgrade Now Available for SDR-1000
FlexRadio is pleased to announce a
new SDR-1000 hardware upgrade that provides 99dB of two tone, third order
dynamic range and +28dBm IP3 at 2KHz spacing in the Medium preamp
setting! This upgrade began shipping on all radios starting on July 15,
2005 and was reviewed by the ARRL for the October 2005 issue of QST.
The QST article states, "Note that the near-in third order IMD dynamic
range is right up there with the best radios we've ever measured, and extends
at least in to 2KHz."
The upgrades involve simple
component changes that can be added to all radios shipped before July 15th,
which have the RFE board installed. ECO-020 and ECO-025 have been posted
on the private customer download site for your review. We are taking
parts kit orders on the "Upgrade" section on the "Pricing"
link on our website. The parts kit sells for $7.00 plus shipping and
handling. We are also offering a factory authorized upgrade service for
$75.00 plus shipping and handling. If you wish to send your radio in for
factory upgrade, please enclose your credit card information with the
shipment. Allow two weeks at our location for the upgrade.
_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
|