Eric,
The reversal of the sliders is my hardware problem. I have had the
speakers set up wrong for some time and did not know it. Sorry for the
mistake.
Jerry WK0J
----- Original Message -----
From: "Eric Wachsmann" <[EMAIL PROTECTED]>
To: "'Jerald Jones'" <[EMAIL PROTECTED]>; "'Duane - N9DG'" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[email protected]>
Sent: Thursday, September 21, 2006 9:52 AM
Subject: RE: [Flexradio] 683 Sub RX Sliders
> There's at least one easy solution if you are using one of our recommended
> soundcards....just swap the output 1&2 cables at the soundcard. ;) I'll
> double check that the source has the correct orientation, but I do believe
> it is correct.
>
>
> Eric Wachsmann
> FlexRadio Systems
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>> radio.biz] On Behalf Of Jerald Jones
>> Sent: Thursday, September 21, 2006 9:38 AM
>> To: Duane - N9DG; [EMAIL PROTECTED]; [email protected]
>> Subject: Re: [Flexradio] 683 Sub RX Sliders
>>
>> My pan sliders for the SubRX are also reversed. Are most everyones
>> reversed
>> or is this just a few of us?
>>
>> Jerry WK0J
>>
>> ----- Original Message -----
>> From: "Duane - N9DG" <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]>; <[email protected]>
>> Sent: Thursday, September 21, 2006 8:40 AM
>> Subject: Re: [Flexradio] 683 Sub RX Sliders
>>
>>
>> >
>> > When I was playing 683 myself last night I was wondering the
>> > very same thing. The physical layout of my speakers is such
>> > that the "left" one is the only one that I can actually move
>> > to be on my right (cable limitations).
>> >
>> > Also while playing with 683 I was once again pondering how
>> > could settings such as volume and "RF Gain" be integrated
>> > directly into the panadapter window. Perhaps sliders
>> > superimposed over the filter bar for each receiver. Probably
>> > not something to pursue with the existing console but should
>> > definitely be thought about for the new console(s).
>> >
>> > Duane
>> > N9DG
>> >
>> >
>> >
>> >
>> > --- "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote:
>> >
>> >> This one may sound stupid ... any way to reverse the main &
>> >> sub pan
>> >> sliders? Seems my rack mount computer is far to the left of
>> >> the operator
>> >> station ... the close powered speaker is left and the slave
>> >> to the far
>> >> right ... so the sliders have a reverse effect!
>> >>
>> >> I guess I could implment the hardware solution and go cut
>> >> the stereo plug
>> >> off the speakers and reverse the wiring!
>> >>
>> >> VE3KH
>
>
>
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
