It's a small matter of programming. At the moment the PowerSDR code only has support in it for 1 CAT serial port. It would not be all that difficult to add support for more, just needs a bit of code. I believe Phil Covington (N8VB) had a TCP->Serial bridge going a while back, seem to remember it worked, but don't recall what became of it
How do folks with a conventional radio hookup a Steppir and CAT control - most (all?) conventional radios only have a single CAT port. I'd have assumed the Steppir controller had a CAT out port that gets passed on to CAT programs, but could not say for sure, have not looked into it. Regards, Bill (kd5tfd) At 07:47 AM 9/23/2006, John Hansen wrote: >Does this mean that CAT is then not available to be used in conjunction >with digital mode or logging programs? It seems to me that there ought >to be a way to route CAT data to both a virtual serial port and a "real" >serial port, but I can't see how to do it. > >John W2FS _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com