Doug, I may be way off base here, but I think what you are looking for may well be outlined in the manual v1.8.0 in chapter 10: Operation, the sections "CW Transmission Operation" and especially "Digital Mode Operation", pages 156 and 161. Also, take a look at the KB article < http://kb.flex-radio.com/article.aspx?id=10306 >. Make sure you set both the Primary and Secondary Connections correctly (PowerSDR > Setup Form > DSP > Keyer Tab) and that you have the PTT and Key lines set up identically in both the PowerSDR Keyer and MixW.
Hope this helps, 73 de Joe - AB1DO ----- Original Message ----- From: "Douglas Shock" <[EMAIL PROTECTED]> To: <flexradio@flex-radio.biz> Sent: Friday, January 12, 2007 00:31 Subject: [Flexradio] n1mm CW and SDR > OK, > I have mixw and mmtty working fb now. However, time to send the Orion II > in > so I thought I would get setup for the upcoming CW contest. > > my virtual comm ports are radio 5-6 > VAC 7-8 > > I have the rig control working but keep getting errors when trying to tx > cw. > Says I need to setup the port. > > Anyone managed to get through this yet? > > > Thanks for any help you might have to offer > > Doug / K0ZU > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070111/d076cbf2/attachment.html > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
