some were reporting a change in Sample Rate and then Correction to preferred
rate but I wasn't
I was curious as to why I did not see this action.
Closed PWSDR
Opened the new Beta Driver
I could not change the Sample Rate from my preferred setting of 192kHz.
I found that having CWSkimmer open cased the Sample Rate selection option to
be 'locked'.
CWS was set to 192, SoftRock, and the Signal I/O device was the FlexRadio
Audio.
Closing CWSkimmer allowed the Sample Rate option to become enabled and
available for change.
Now the SR change in the Beta that other reported also occurred on my
system.
I was just curious. Usually I'm the one with anomalies. LOL
----- Original Message -----
From: "Tim Ellison" <telli...@itsco.com>
To: "Robert Bajuk" <rba...@gmail.com>; "Eric Wachsmann"
<e...@flex-radio.com>; <flexradio@flex-radio.biz>
Sent: Friday, March 20, 2009 7:11 AM
Subject: Re: [Flexradio] W2RF branch with 3.4.0.4877?
As long as the sampling rate (SR) returns back to the original SR when you
start PowerSDR, then you are experiencing the expected behavior of the
new driver. If the SR does not return to its previous setting or your
radio is initially off frequency when you hit the Start button in
PowerSDR, that is the condition Eric needs to know about.
-Tim
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Robert Bajuk
Sent: Friday, March 20, 2009 4:28 AM
To: Eric Wachsmann; flexradio@flex-radio.biz
Subject: Re: [Flexradio] W2RF branch with 3.4.0.4877?
Exactly, same thing here.... it changes to 48kHz upon initialization and
goes back to 96 kHz in my case as soon I hit the Start button in PowerSDR.
No big pain
73 Robert
2009/3/20 Eric Wachsmann <e...@flex-radio.com>
I can confirm that when launching PowerSDR, the driver (note, not
PowerSDR
setting) changes to 48kHz upon initialization. This is a new
undesirable behavior with the Beta driver that we've reported. Note
that as soon as you start the audio stream (i.e. hit the Start
button), the sample rate will switch back to whatever the desired rate
is in PowerSDR.
Eric Wachsmann
FlexRadio Systems
On Thu, Mar 19, 2
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
