Using HRD v5.0 with com0com and VAC on SDR-1000 here. So, the delay on PTT
is not an issue for the SDR-1000 only. The problem is not in the FlexRadio
hard- or software.
Simply use two Virtual Com ports for HRD-DM780. One Vcom port for CAT
control between PowerSDR and the second Vcom port for PTT control
configuration in DM780. No delay at all on PTT if configured this way.
Eddy ON5UQ.
----- Original Message -----
From: "Steven O'Neal" <se_on...@hotmail.com>
To: "Flex" <flexradio@flex-radio.biz>
Sent: Saturday, August 01, 2009 12:43 AM
Subject: [Flexradio] Anyone using HRD V 5.0
I took the plunge and updated my version 4.0 HRD to version 5.0 and wanted
to see if anyone else running a Flex has done so and what sort of problems
they are having.
Problems I have encountered so far:
Long delay going into and out of Transmit HRD Bug was already open, so I
added a bit more for the Flex 3000 in use here.
I had a Blue Screen of Death before using an earlier version, current one
is 2277.
Have not entirely figured out the setup for waterfall settings, tricks and
tips appreciated.
Olivia operation seems to be somewhat improved, worked a ZL on 20 the
other night with a s/n of around -2 who was running Fldigi, which has been
slightly problematic in the past.
So anyone else running Version 5 of HRD?
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com
