Steven,
This is my setup with N8VB vCom :
PowerSDR setup/CAT Control :
Enable CAT checked - Port : COM8
PTT Control checked
Port COM9 with RTS and DTR checked.
DM780/Program Options/PTT tab
PTT Via Serial (COM) port checked
COM Port 19 selected with RTS and DTR checked
Some actions initiated from HRD/Logbook are very slow. Make this test :
in PowerSDR Setup/General/Options, check Always on Top. That will permit
to see what happen on PowerSDR when you click on one of the buttons of
the radio pane of the logbook. Try the Bin button by example. It takes 4
seconds before being activated on the Flex.
Uncheck Always on Top, if you don't want. to keep it that way.
Some days ago, I spoke with Bob, K5KDN, designer of the CAT commands
about this problem. He did not see anything wrong.
73
José F5JD
Steven O'Neal a écrit :
Eddie
Help me out here.
I might be on the wrong path here, but I thought if you set CAT control in the
CAT control TAB of Power SDR, the PTT field did nothing, maybe got that wrong.
So how do I set HRD to use CAT to control the radio, which I don't use much, and to use PTT in addition to the CAT TX command, in HRD that is. CAT is now on Com 6 which is COM 16 using VCOM, so COM 7 would be COM17. How do I configure HRD to use the separate PTT command interface?
I do notice some strangeness in HRD V5.0 when it comes to overall speed of response. There is a fair amount of lag which might be associated with polling the Flex over the CAT interface (?).
Thannks
From: [email protected]
To: [email protected]; [email protected]
Subject: Re: [Flexradio] Anyone using HRD V 5.0
Date: Sat, 1 Aug 2009 12:02:11 +0200
Using HRD v5.0 with com0com and VAC on SDR-1000 here. So, the delay on PTT
is not an issue for the SDR-1000 only. The problem is not in the FlexRadio
hard- or software.
Simply use two Virtual Com ports for HRD-DM780. One Vcom port for CAT
control between PowerSDR and the second Vcom port for PTT control
configuration in DM780. No delay at all on PTT if configured this way.
Eddy ON5UQ.
----- Original Message -----
From: "Steven O'Neal" <[email protected]>
To: "Flex" <[email protected]>
Sent: Saturday, August 01, 2009 12:43 AM
Subject: [Flexradio] Anyone using HRD V 5.0
I took the plunge and updated my version 4.0 HRD to version 5.0 and wanted
to see if anyone else running a Flex has done so and what sort of problems
they are having.
Problems I have encountered so far:
Long delay going into and out of Transmit HRD Bug was already open, so I
added a bit more for the Flex 3000 in use here.
I had a Blue Screen of Death before using an earlier version, current one
is 2277.
Have not entirely figured out the setup for waterfall settings, tricks and
tips appreciated.
Olivia operation seems to be somewhat improved, worked a ZL on 20 the
other night with a s/n of around -2 who was running Fldigi, which has been
slightly problematic in the past.
So anyone else running Version 5 of HRD?
_________________________________________________________________
Express your personality in color! Preview and select themes for Hotmail®.
http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM_HYGN_express:082009
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to [email protected]
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to [email protected]
