Gerald
What is the process to pre-order ?
Thanks
Dave W0DHB
Gerald Youngblood wrote:
I think most of the questions have been answered on this thread so I will
just add an update:
1. The FLEX-V/U module will completely fill the chassis so there is no more
room for other internal options.
2. The design has been completely tested using SMA connected modules on the
bench.
3. PCB layout is well under way.
4. We are planning to have production by year end.
5. We are taking pre-orders now.
Regards,
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
"Tune in excitement!" (TM)
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of mcha...@theriver.com
Sent: Friday, August 21, 2009 5:48 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question
Tim, If that fills up the box, any plans for an expansion chassis if Flex
comes out with any more goodies?
Mike
--- telli...@itsco.com wrote:
From: Tim Ellison <telli...@itsco.com>
To: "mcha...@theriver.com" <mcha...@theriver.com>, Kevin Hobbs
<ve...@cogeco.ca>
CC: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz>
Subject: RE: [Flexradio] FLEX-5000 V/U upgrade module question
Date: Fri, 21 Aug 2009 18:41:59 -0400
Yes. The RX2 installs below the heat sink on underneath the TRX board.
Both the ATU and V/U-mod install on top of the heat sink above the PA. It
will fill up the space in the chassis, but leave enough room for adequate
cooling and air flow.
-Tim
-----Original Message-----
From: mcha...@theriver.com [mailto:mcha...@theriver.com]
Sent: Friday, August 21, 2009 6:37 PM
To: Kevin Hobbs
Cc: Tim Ellison; flexradio@flex-radio.biz
Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question
Tim, Is there room in the box for both the second receiver and the
transverter, assuming that you already have the ATU installed?
Thanks,
Mike
--- ve...@cogeco.ca wrote:
From: "Kevin Hobbs" <ve...@cogeco.ca>
To: "'Tim Ellison'" <telli...@itsco.com>, <flexradio@flex-radio.biz>
Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question
Date: Fri, 21 Aug 2009 17:47:18 -0400
Any update on timing / availability?
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Friday, August 21, 2009 5:32 PM
To: Bob Tracy; 'Barry Jablonski'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question
That is it, exactly. A power connector has to be added to the PA board for
the 60 watt version.
-Tim
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bob Tracy
Sent: Friday, August 21, 2009 5:04 PM
To: 'Barry Jablonski'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question
Barry,
The way I understand it, it is the power handling capability of the built-in
connectors used by the VU. To get to 60 watts, separate power wiring must be
added. Maybe someone from Flex will give a better explanation.
73,
Bob K5KDN
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Barry Jablonski
Sent: Friday, August 21, 2009 3:45 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] FLEX-5000 V/U upgrade module question
I'm just curious about the '5000 transverter field upgrade. Why is the field
upgrade limited to the 30W version and the 60W version requires a factory
install?
Barry
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to btr...@anvilcom.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/ Message delivered to telli...@itsco.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to ve...@cogeco.ca
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.63/2317 - Release Date: 08/21/09
06:04:00
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to mcha...@theriver.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to ger...@flex-radio.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to d...@w0dhb.net
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com
