The process for pre-ordering until we can get the items added to the on-line store is to contact Sales (sa...@flex-radio.com) and talk to Greg.
-Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Beumer W0DHB Sent: Saturday, August 22, 2009 3:59 PM To: ger...@flex-radio.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question Gerald What is the process to pre-order ? Thanks Dave W0DHB Gerald Youngblood wrote: > I think most of the questions have been answered on this thread so I > will just add an update: > > 1. The FLEX-V/U module will completely fill the chassis so there is no > more room for other internal options. > 2. The design has been completely tested using SMA connected modules > on the bench. > 3. PCB layout is well under way. > 4. We are planning to have production by year end. > 5. We are taking pre-orders now. > > Regards, > Gerald > > Gerald Youngblood, K5SDR > President > FlexRadio Systems > 13091 Pond Springs Rd. #250 > Austin, TX 78729 > Phone: 512-535-4713 > www.flex-radio.com > > "Tune in excitement!" (TM) > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of > mcha...@theriver.com > Sent: Friday, August 21, 2009 5:48 PM > To: Tim Ellison > Cc: flexradio@flex-radio.biz > Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question > > Tim, If that fills up the box, any plans for an expansion chassis if > Flex comes out with any more goodies? > > Mike > > --- telli...@itsco.com wrote: > > From: Tim Ellison <telli...@itsco.com> > To: "mcha...@theriver.com" <mcha...@theriver.com>, Kevin Hobbs > <ve...@cogeco.ca> > CC: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> > Subject: RE: [Flexradio] FLEX-5000 V/U upgrade module question > Date: Fri, 21 Aug 2009 18:41:59 -0400 > > Yes. The RX2 installs below the heat sink on underneath the TRX board. > Both the ATU and V/U-mod install on top of the heat sink above the PA. > It will fill up the space in the chassis, but leave enough room for > adequate cooling and air flow. > > -Tim > > -----Original Message----- > From: mcha...@theriver.com [mailto:mcha...@theriver.com] > Sent: Friday, August 21, 2009 6:37 PM > To: Kevin Hobbs > Cc: Tim Ellison; flexradio@flex-radio.biz > Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question > > Tim, Is there room in the box for both the second receiver and the > transverter, assuming that you already have the ATU installed? > > Thanks, > > Mike > > --- ve...@cogeco.ca wrote: > > From: "Kevin Hobbs" <ve...@cogeco.ca> > To: "'Tim Ellison'" <telli...@itsco.com>, <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question > Date: Fri, 21 Aug 2009 17:47:18 -0400 > > Any update on timing / availability? > > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison > Sent: Friday, August 21, 2009 5:32 PM > To: Bob Tracy; 'Barry Jablonski'; flexradio@flex-radio.biz > Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question > > That is it, exactly. A power connector has to be added to the PA board > for the 60 watt version. > > > -Tim > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bob Tracy > Sent: Friday, August 21, 2009 5:04 PM > To: 'Barry Jablonski'; flexradio@flex-radio.biz > Subject: Re: [Flexradio] FLEX-5000 V/U upgrade module question > > Barry, > > The way I understand it, it is the power handling capability of the > built-in connectors used by the VU. To get to 60 watts, separate power > wiring must be added. Maybe someone from Flex will give a better explanation. > > 73, > > Bob K5KDN > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Barry Jablonski > Sent: Friday, August 21, 2009 3:45 PM > To: flexradio@flex-radio.biz > Subject: [Flexradio] FLEX-5000 V/U upgrade module question > > I'm just curious about the '5000 transverter field upgrade. Why is the > field upgrade limited to the 30W version and the 60W version requires > a factory install? > > Barry > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to btr...@anvilcom.com > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ Message delivered to telli...@itsco.com > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to ve...@cogeco.ca > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.392 / Virus Database: 270.13.63/2317 - Release Date: > 08/21/09 06:04:00 > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to mcha...@theriver.com > > > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to ger...@flex-radio.com > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ Message delivered to d...@w0dhb.net > > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
