i second that motion.... dxLab work GREAT !!!! dan, w5xz
--- On Fri, 12/11/09, George Steube <a...@bellsouth.net> wrote: From: George Steube <a...@bellsouth.net> Subject: Re: [Flexradio] Fwd: More Flex in contesting To: "K0DAN" <k0...@comcast.net>, "FlexRadio reflector" <flexradio@flex-radio.biz> Date: Friday, December 11, 2009, 12:00 AM I did, but Logic8 kept locking up, I repeatedly tried to get the developer to fix the problem with no luck. I changed to DXLab suite and have not looked back. You will not get better support on any product than Dave provides with DXLab. George W2GS -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]on Behalf Of K0DAN Sent: Thursday, December 10, 2009 4:35 PM To: FlexRadio reflector Subject: Re: [Flexradio] Fwd: More Flex in contesting Speaking of logging software, have any FLEX users out there interfaced LOGic to their SDR radios? 73 dan k0dan ----- Original Message ----- From: "Rudy Bakalov" <r_baka...@yahoo.com> To: "FlexRadio reflector" <flexradio@flex-radio.biz>; "Brian Lloyd" <brian-wb6...@lloyd.com> Sent: Thursday, December 10, 2009 12:17 PM Subject: Re: [Flexradio] Fwd: More Flex in contesting Fair enough. The issue with the logger is the ease of configuration. Many hams are intimidated by messing with CAT commands. Also, there is a much higher risk of an error compared to a visual interface that clearly defines the configuration. Rudy N2WQ --- On Thu, 12/10/09, Brian Lloyd <brian-wb6...@lloyd.com> wrote: From: Brian Lloyd <brian-wb6...@lloyd.com> Subject: [Flexradio] Fwd: More Flex in contesting To: "FlexRadio reflector" <flexradio@flex-radio.biz> Date: Thursday, December 10, 2009, 1:00 PM On Thu, Dec 10, 2009 at 7:09 AM, Rudy Bakalov <r_baka...@yahoo.com> wrote: > It appears that the logger can in fact re-program the antenna selection on > the fly using the set of available CAT commands. But this is extremely > inefficient as the logger will have to send all the CAT commands just to > turn the TX on, before even sending the actual contest message. It is much > better to extend the existing PowerSDR software with a SO2R mode where > antenna and relay outputs are per VFO rather than band. What you have described, i.e. sending all the commands to change the antenna settings before initiating the transmit, is both necessary and sufficient to meet all cases, present and future. If your data link is fast there will be no appreciable delay. At 19200 bps a 20 byte command sequence is transmitted in 10.4 ms. If it is running on a virtual serial port where the speed is limited only by the context switching time and processing delay, it would be much faster. The only time it might be an issue is if someone is trying to run full QSK on CW and even then, not too much. -- 73 de Brian, WB6RQN/J79BPL _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to r_baka...@yahoo.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to k0...@comcast.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to a...@bellsouth.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to w...@att.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
