I am running Taps 110 Delay 100 Gain 35 and it gets rid of most of the "tunerupers" unless they are right on or near the "dial frequency" on LSB 75 and 40 meters.
snip On 04/29/2010 12:36 PM, Tim Ellison wrote: > Welcome to the club, Hunter. > > If you are using PowerSDR v1.18.x, I am afraid that the default settings for > ANF are about as good as it is going to get. Both NR and ANF have been > significantly improved in the next major version of PowerSDR v2.0.0 due to be > out relatively soon (when the FLEX-1500 is released into the wild). > > The v1.18.x defaults for ANF are taps:65/delay:50/gain:30 > > On the "spur" issue, toggle the Spur Reduction (SR button) on and off. If > the spur moves, it is a DDS spur and all you can do is move it out of the RX > passband. If it doesn't move, then it's source is external of the radio. > What is the signal strength of it? > > > > -Tim > > > > Steven -- Regards de KC6KGE Skype flamebait Monitoring at least one of the following Frequencies if the radio is on and I am not on a net or using the digital modes; 3975, 14.329. I am always listening for fellow Flexers. _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/