Len,
Make sure that the Mixer at the top of the console, just like in
1.18.6 is set to mic, urned up to the top, and you may have to raise
the mic gain from the default of 10. Put your TX meter in Mic to see
the audio coming through. Oh an another thing, you might want to
make sure to still have VAC turned off. If it worked in 1.18.6, it
should work just fine in 2.0.6 too.
73,
Dudley
WA5QPZ
Len Morris VE3FJB wrote:
Hi, I need a hand here. I have a Flex3k, worked just fine with 1.8.6.. I
upgraded to 2.0.6 and all seems to work, except SSB TX. I can get a 100 watts
out in CW, but no output in SSB, it appears there is no audio driving the TX. I
have gone through the setup, and can't see anything that would turn the audio
off. I use a Yaesu MH-31 that worked fine in the older PSDR.. It has to be some
thing simple I just can't see...
Also is there a user manual for the PSDR 2x? I understand this beta, but there
must be something for dummies like me...lol
Any help would be appreciated.
Thanks
Len Morris VE3FJB/VA3LM
lmorris at lenmar dot net
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
