Make sure Spur Reduction is OFF And you can fiddle with the DDS IF value to something lower than the default 9K for USB modes. You will have to use negative numbers for LSB modes.
-Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tom Bray Sent: Tuesday, January 04, 2011 8:21 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Flex 1500 Panadapter Display Is there anyway to move the receive/transmit frequency in the panadapter display? With it set to the .5 setting it shows about 10KHz up and the rest is all below the listening to frequency. I would like to be able to see 20KHz up and at most 10KHz below. I assume that this isn't trivial but I figured I would ask. Tom WB8COX _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
