Gentlemen, you have done a great job. Effortless install and CW works perfectly at 35wpm.
On Fri, Feb 18, 2011 at 6:56 PM, Ray - K9DUR <k9...@rnacs.com> wrote: > Kevin, > > The problem with that approach is that often you need to start with a fresh > database as a troubleshooting measure. Sometimes a setting can get > inadvertently changed to a value that can cause the radio not to work > properly. > > Using SDRDataTransfer to move in settings from a known good database avoids > the problem of propagating the corrupted setting. > > 73, Ray, K9DUR > http://k9dur.info > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Kevin Hobbs > Sent: Friday, February 18, 2011 4:50 PM > To: 'Tim Ellison'; 'Gerald Youngblood'; 'Reflector'; > flexe...@flex-radio.biz > Subject: Re: [Flexradio] [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 > Release Candidate > > Yes ... there might be database schema changes ... but I just don't think > it > is too much to ask to suck the simple parameters like "equalizer", > "antenna", etc out and then put them back where they belong ... would go > along way to making this more user friendly. > > > > > -----Original Message----- > From: Tim Ellison [mailto:telli...@itsco.com] > Sent: February-18-11 4:35 PM > To: Kevin Hobbs; 'Gerald Youngblood'; 'Reflector'; flexe...@flex-radio.biz > Subject: RE: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release > Candidate > > There are database schema changes and/or default parameter settings that > change between releases. User data is not kept completely separate from > radio data in the database, so a new DB is created to ensure the database > integrity is maintained. > > You do have the ability to use the K9DUR Data Import program to facilitate > migrating setting from an older database > http://kc.flexradio.com/KnowledgebaseArticle50327.aspx > > -Tim > > > -----Original Message----- > From: flexedge-boun...@flex-radio.biz > [mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Kevin Hobbs > Sent: Friday, February 18, 2011 4:26 PM > To: 'Gerald Youngblood'; 'Reflector'; flexe...@flex-radio.biz > Subject: Re: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release > Candidate > > Hi Gerald > > I look forward to trying the update ... but, as I twiddle a million > settings > trying to get my radio back to the way it was ... can you really not keep > any of the user settings between updates? Must I really completely re-enter > my Antenna table, CAT settings, VAC settings, CW strings, etc??? These > things didn't seem to change ... so I don't understand why they must be > continually re-entered manually? > > 73 Kevin > > > > -----Original Message----- > From: flexedge-boun...@flex-radio.biz > [mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood > Sent: February-18-11 3:59 PM > To: Reflector; flexe...@flex-radio.biz > Subject: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release Candidate > > Dear FlexRadio customers: > > > FlexRadio is pleased to announce the availability of PowerSDR v2.0.19 > Release Candidate 1 (RC1) for public download from our website. This > version incorporates a totally new CW keying architecture that was written > from the ground up to achieve minimum jitter and latency using both > internal > and external keyers. To say this is a rewrite is a bit of an > understatement. We got out Farnsworth and started from "dit." Everything > is right now in "PARIS." > > > We have also done significant work since the v2.0.16 beta release to > improve > installation and overall out of box experience on all radios. We have > optimized the USB driver for the FLEX-1500 to perform well on a wide range > of PC platforms. We have also incorporated a new FireWire driver with less > CPU overhead on Windows 7 systems. The number of little and not so little > bug fixes are too numerous to mention here. Check out the change log and > release notes. A note about release notes, PLEASE READ the them to get the > most from your FlexRadio. > > > The URL for the release notes is: > > http://support.flex-radio.com/Downloads.aspx?id=359 > > > > The URL for the installer software is: > > http://support.flex-radio.com/Downloads.aspx?id=358 > > > > We are very excited about v2.0.19 RC1 as we enter the final steps toward > the > PowerSDR v2.0.x Official Release. We thank you for your patience and > support while we have been preparing this important release. We request > you > report any bugs found in this release to the bug tracker at > http://support.flexradio.com/BugList.aspx?it=b. Be sure to note 2.0.19 > RC1 > in the Software Product Version field as we will be focusing our attention > on those specific reports. > > > > We would like to say a special thanks to our beta team for their tireless > support in testing a number of interim releases to get here. > > > We are taking the weekend off but 2.1 starts on Monday. In the software > world it is never finished. > > > Warmest 73s, > > > Gerald > > > Gerald Youngblood, K5SDR > President and CEO > FlexRadio Systems(TM) > 13091 Pond Springs Road, #250 > Austin, TX 78729 > Phone: 512-535-4713 Ext. 202 > Email: ger...@flexradio.com > Web: www.flexradio.com <http://www.flex-radio.com/> > > Tune In Excitement (TM) > > PowerSDR(TM) is a trademark of FlexRadio Systems > _______________________________________________ > Flexedge mailing list > flexe...@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > flexe...@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > _______________________________________________ > Flexedge mailing list > flexe...@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/