I am somewhat confused! My PC doesn't have a mic connector that matches the mic connector on my Flex 3000. You may be using a computer mic with an adapter. I think most computer mic's need a bias voltage for power, check to see if you are getting that on your adapter from the 3K. If that mic setup did work in the past, I would look at all the options where you specify where the audio input will be coming from.
73 - Mike WA8BXN -------Original Message------- From: kd0...@gmail.com Date: 07/03/11 15:51:38 To: FlexRadio@flex-radio.biz Subject: [Flexradio] No transmit audio on PSDR 2.0.22 Hi, I haven't used my F3K for anything other than digital modes for a long Time. Voice used to work fine with the same equipment I am using now, But no luck. With the radio on dummy load, I downloaded PSDR 2.0.22, did the Factory defaults reset, went to the voice band of 20 meters, chose USB, and set the TX meter to ALC. With a headset mic plugged in to the Front panel connector, ALC does not move however I whistle into the Mic. To make sure the mic is working properly, I plugged it into my windows Machine, recorded a short bit of audio and played it back. No problem. The wiring of the mic connector is still fine, I checked it end-to-end And ring/tip are properly wired. It has worked well in the past, and I Had no real reason to mistrust it but I checked anyhow. I could make things work by feeding PSDR the audio from VAC, this Approach is fine, but it has the drawback of making it impossible to Use pre-recorded audio from N1MM and the mic at the same time. (as far As I know... It appears that only one application at a time can use Either end of a VAC) Any suggestions or ideas for troubleshooting this further would be appreciated. 73, Matt _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/