Go to the Mixer menu and make sure you have enabled the front Mic for input. That gets me every time!
73 Neal On Sun, Jul 3, 2011 at 3:51 PM, <kd0...@gmail.com> wrote: > Hi, > > I haven't used my F3K for anything other than digital modes for a long > time. Voice used to work fine with the same equipment I am using now, > but no luck. > > With the radio on dummy load, I downloaded PSDR 2.0.22, did the > factory defaults reset, went to the voice band of 20 meters, chose > USB, and set the TX meter to ALC. With a headset mic plugged in to the > front panel connector, ALC does not move however I whistle into the > mic. > > To make sure the mic is working properly, I plugged it into my windows > machine, recorded a short bit of audio and played it back. No problem. > > The wiring of the mic connector is still fine, I checked it end-to-end > and ring/tip are properly wired. It has worked well in the past, and I > had no real reason to mistrust it but I checked anyhow. > > I could make things work by feeding PSDR the audio from VAC, this > approach is fine, but it has the drawback of making it impossible to > use pre-recorded audio from N1MM and the mic at the same time. (as far > as I know... it appears that only one application at a time can use > either end of a VAC) > > Any suggestions or ideas for troubleshooting this further would be > appreciated. > > 73, > Matt > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > -- Abroham Neal Software www.abrohamnealsoftware.com Work:(540) 645 5394 Mobile:(540) 645 8171 _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
