That's interesting. 
My PSDR always starts up where it left off, the settings do not change as the 
others have described.
I also always shutdown the software before the hardware. (and vice versa)

Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
  ----- Original Message ----- 
  From: k8...@aol.com 
  To: k...@arrl.net ; scott.wa4...@gmail.com ; flexradio@flex-radio.biz 
  Sent: Friday, October 14, 2011 4:16 PM
  Subject: Re: [Flexradio] Band/ freq changes after shutoff


  I hope you are shutting down your PowerSDR software first. If you don't it  
  will revert to the last settings you had when you exited the Setup menu.
   
  Bob
  K8MLM
   
   
  In a message dated 10/14/2011 6:41:50 P.M. Eastern Daylight Time,  
  rpmar...@comcast.net writes:

  My 5000A  has done that since the day I've owned it.  I have never figured
  out  why sometimes it remembers where I left it when it was shut off,  and
  sometimes it doesn't.  Every version of Power SDR has done  this.  I've
  always assumed it was something I was doing incorrectly,  or some box I
  neglected to check, but darned if I've been able to figure it  out.  I 
  always
  stop Power SDR first, and then close the  application

  If there's a simple answer to this, I'd love to hear  it.  I've just learned
  to live with it.

  de Rick,  KN3C


  -----Original Message-----
  From: Scott Simmons - WA4DOS  [mailto:scott.wa4...@gmail.com] 
  Sent: Friday, October 14, 2011  18:19
  To: flexradio@flex-radio.biz
  Subject: [Flexradio] Band/ freq  changes after shutoff


  Folks, I noticed after upgrading to V.2.2.3  about a month or so ago, that
  the band and frequency changes from the  previous operating session. When I
  fire up the next time, the rig is on a  different band and freq...As an
  example, I'm on 14.300 MHz and then shut  down PowerSDR and turn off the 
  rig.
  The next day the band and freq is  somewhere else (ie:40 meters). I believe
  this behavior is pretty  consistent.

  Any ideas? Would resetting to factory defaults fix the  anomaly?



  Flex 5000A with single RX, V2.2.3, ... ZT Systems PC,  Quad Core 3.2 MHz 
  CPU,
  8GB RAM running WIN 7 Premium OS 

  Scott S. -  WA4DOS  



  _______________________________________________
  FlexRadio  Systems Mailing  List
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archives:  http://www.mail-archive.com/flexradio%40flex-radio.biz/
  Knowledge Base:  http://kc.flexradio.com/  Homepage:  
  http://www.flexradio.com/

  _______________________________________________
  FlexRadio Systems Mailing List
  FlexRadio@flex-radio.biz
  http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
  Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
  Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to