Thanks to a knowledgable Flexer using TeamViewer, I had VAC and several digital modes working, including DigiPan. I was decoding PSK-31 amd even had a couple of 2 meter QSOs on it. (No HF antennas here at present)
Then a virus struck my computer and I had to have it wiped clean and XP reinstalled. Of course, I lost all programs. Luckily, I had no data as such in the radio computer. I managed to get Power SDR reinstalled and working OK, but I was without VAC and WSJT. Another friendly Flexer, again using TeamViewer, installed VAC for me. Howver, nothing is working. I installed WSJT and DigiPan. The WSJT screen shows: Audio Input Output Device Name Device Channels Channels 0 2 0 Microsoft Sound Mapper -input 1 2 0 FlexRadio Audio 2 2 0 SigmaTel Audio 3 2 0 Virtual Cale 1 4 2 0 Virtual calbe 2 5 0 2 Microsoft Sound Mapper - output 6 0 2 FlexRadio Audio 7 0 2 FlexRadio SPDIF/AC3 8 0 2 SignalTel Audio 9 0 2 Vitual Cable 1 10 0 2 Virtual cable 2 Error opening input audio stream : Errortext Unanticipated host error Number: -9999 Error 1 in JT audio. You will only be able to work offline. I do not remember that these particular settings appered before when things were working. Where the Error message is now, it said something like "Data stream running normally." When I try to bring up digiPan, I get a screen that says, "Sound card is already in use or does not exist" If I bring up VAC, I get the Virtual Audio Control Panel with the following selections Driver Parameters Cable Parameters Cables 2: Format Range SR 11025 48000 BPS 8 1 NC 1 2 Restart Max Inst. 20 MS per Int 7 Stream fmt Cable Range Volume Control ckd Connected Source Lines Mic not ckd Line ckd S/PDF not ckd Clock Cor % 100.000 In the box below: Cable Max Instances MS per Int SR Range BPS Range NC Range Stream fmt Limit 1 20 7 11025 48000 8..16 1..2 Cable Range 2 20 7 11025 48000 8..16 1..2 Cable range continuing across Volume ctl SR BPS NC RC stms PB stms Enabled 48000 16 2 1 0 Enabled 48000 16 2 0 1 I hope someone can make heads or tails out of this and tell me what to adjust. Thanks in advance. 73, Bill Tynan, W3XO _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/