I have DXLabs Commander configured as RCP1 in DDUtil and CW Skimmer configured as a Secondary CAT Serial Port in Commander with the Follow & Lead Primary radio button selected.
-73- Bernie W4BGH ---------- on 9/18/12 9:41 AM, Jim Jannuzzo at jsqu...@msn.com wrote: > Interesting discrepancy between your results and mine. > I have CW Skimmer decoding wideband CW on my RX2, while simultaneously > decoding other digi modes on my RX1 using DM780. Several posters have > reported problems hooking up CWS with 2.4, and I don't understand where the > problem lies. > I use DDutil from which to hang third party software, do you? > Jim KJ2P >> > Date: Mon, 17 Sep 2012 19:38:52 -0400 >> > From: bh...@garlic.com >> > To: hmills1...@yahoo.com; flexradio@flex-radio.biz >> > Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 >> > >> > I could never get it to work. Between the problem with CW Skimmer and the >> > problem with DXLabs Winwarbler mentioned by Rich, W3ZJ, (below) I reverted >> > back to Ver. 2.3.5. >> > --------------- >> > I did have a little trouble with DXLab's WinWarbler because it doesn't like >> > WDM. But since I feed the power speaker output from the Flex-3000 to the >> > line input on my computer sound card I was able to configure WinWarbler to >> > get its audio from the computer sound card instead of the VAC and that >> seems >> > to be working OK. I think what we are seeing here is some set up problems >> > because the Beta testers didn't have duplicates of all our various set ups >> > but so far it has all been solvable. >> > >> > 73, Rich - W3ZJ >> > --------------- >> > >> > -73- >> > Bernie >> > W4BGH >> > ------------- >> > >> > on 9/17/12 12:03 PM, Hunter Mills at hmills1...@yahoo.com wrote: >> > >>> > > I am having the same problem posted earlier by Bernie, W4BGH, but have not >>> > > been >>> > > fortunate to find a fix. >>> > > >>> > > I have checked and re-checked my settings in PowerSDR, CSK, and VAC 4.1 but >>> > > can't get CSK to decipher. >>> > > It was working fine prior to PSDR v2.4.4 upgrade. >>> > > >>> > > Only suggestion I could not try was using FlexRadio, instead of VAC Line >>> 2, as >>> > > Signal I/O Device >>> > > in CSK. For some reason, Windows XP is not providing that as an audio >>> device >>> > > option (maybe a problem >>> > > with my PNP Emulator in XP). >>> > > >>> > > I was using MME in CSK and VAC prior to upgrade but have changed them to >>> > > WDMS-K since the upgrade. >>> > > >>> > > Any suggestions would be appreciated - Hunter K3IE. >>> > > >>> > > My setput is the same as Bernie's: >>> > > >>> > > >>> > > 'I am not able to get CW Skimmer v 1.71 to decode properly with PowerSDR >>> > > v2.4.4 and a Flex-3000. The radio CAT commands seem to be working >>> correctly >>> > > using PowerSDR v2.4.4 >>> > > and DXLabs Commander. CW Skimmer is setup as a secondary CAT control in >>> > > Commander using Kenwood CAT protocol. The correct frequency is >>> indicated in >>> > > both Commander and CW Skimmer. There is noise indicated in the >>> CW-Skimmer >>> > > waterfall, however, there is no >>> > > CW decoding indicated. The Audio setup in CW Skimmer is: SoundCard >>> Driver: WDM >>> > > Signal I/O Device: 04 Virtual Cable 2 >>> > > Audio I/O Device: 03 Virtual Cable 1 >>> > > Channels: Left/Right: I/Q >>> > > Shift Right Channel Data: 0 Samples The Radio setup in CW Skimmer is: >>> Hardware >>> > > Type: SoftRock IF >>> > > CW Pitch: 750 Hz >>> > > Audio IF: 9750 Hz >>> > > Sample Rate: 96 kHz The PowerSDR v2.4.4 VAC setup is: Primary: Buffer >>> Size: >>> > > 1024 Sample Rate: 96000 VAC1: Enable VAC1... Checked Driver: Windows >>> WDM-KS >>> > > Input: Virtual Cable 1 Output: Virtual Cable 2 Buffer Size: 1024 Sample >>> Rate: >>> > > 96000 Hz Mono/Stereo: unchecked Direct I/Q: checked Calibrate I/Q: >>> checked >>> > > Buffer Latency: 120 Allow PTT to override... checked >>> > > _______________________________________________ >>> > > FlexRadio Systems Mailing List >>> > > FlexRadio@flex-radio.biz >>> > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>> > > Knowledge Base: http://kc.flexradio.com/ Homepage: >>> http://www.flexradio.com/ >> > >> > >> > >> > _______________________________________________ >> > FlexRadio Systems Mailing List >> > FlexRadio@flex-radio.biz >> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> > Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/