Thanks for the replies, still having no luck finding a solution. NOTE:- cable and fire wire card is tested OK. I managed to delete my early restore points. Freezes in RX mode, no stray RF issues. DAVE:- I ran a program called Memtest and all tests passed 100% Les:- Freezing occurs with VAC either on or off I have run all the Windows tests and every thing passes Tried to install "Hotfix Fix319514" and it says it is not for my computer. ERNEST: - I checked and found I have an Interrupt request (IRQ) conflict.
IRQ 16 - 1304 OHCI Compliant Host Controller (Legacy) IRQ 16 - Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 1 - 1C10 IRQ 16 - Xeon E3-1200/2nd Generation Intel(R) Core(TM) Processor Family PCI Express Root Port - 0101 I don't believe I can change the IRQ in Windows 7 as they are automatically generated? *I just disconnected from my network and also disabled my network card and PowerSDR still freezes with the same symptoms?* *Some times randomly I hear the same sound as pulling out a USB memory stick and the fire wire link momentary drops out and the "FlexRadio" global settings display will go blank, freeze or the DPC counter will stop working.* ...................................................................................................................................................................................................... I have been working on this problem for several weeks now and I hope some one out there can help me with a solution. > > My radio is a F5k and it works perfect on my i5/W7/64 bit laptop using a > SIIG Firewire 400 2-Port (6-pin) ExpressCard so my radio and fire wire > cable test OK. > > My radio has worked perfect on my home PC for several years but some thing > has changed or it has developed a fault and now PowerSDR will freeze > randomly any where from a few seconds to a few hours. Some times the > panadapter will freeze and the audio will stop and turning off and on PowerSDR > will solve the issue. Some times turning off and on PowerSDR will grey out > the panadapter and some times turning off PowerSDR will generate an error > message "Unhandled exception has occurred in your application" and PowerSDR > will crash requiring both the F5k and PowerSDR to be turned off and on > again. > > I have tried all the things Flex recommend such as disabling power savings, > using the legacy driver, factory defaults, reloading PowerSDR, no over > clocking etc etc and nothing changes. > > I replaced the SIIG FireWire 400 2-Port PCIe card in my PC with a spare > SIIG FireWire 400 3-Port PCI card (in a different slot) and I still have > the exact same problem, so the problem is not the fire wire card either. > The problem is a software problem in my PC. My PC is a high performance > machine purchased specifically to run my F5k and I should not be having any > issues. I have tried using different drivers for the FireWire cards and the > problem still remains. > > System details are; > > PowerSDR v2.7.2 > Max DPS ~ 190 us > Safe mode 1 > Sampling rate 96000 Hz > Buffer size 2048 > > Intel Core i7-2600K CPU @ 3.40 GHz (BIOS up to date) > RAM 16 GB > SIIG FireWire 400 2-Port PCIe card and high quality cable (worked perfect > for several years) > SIIG FireWire 400 3-Port PCI card and high quality cable (Made no > difference, problem still occurs) > Windows 7 Home Premium 64 bit (All updates complete) > > Any help appreciated, > > Craig > > VK6JJJ / VK0JJJ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz