Hi, some of you might remember: I'm working on a Seneca-Model. This is just to show you, that I am still alive.
The 3D model: outside view http://www.t3r.de/fg/seneca/fgfs-screen-012.jpg another outside view http://www.t3r.de/fg/seneca/fgfs-screen-011.jpg panel http://www.t3r.de/fg/seneca/fgfs-screen-010.jpg see the pedal's texture? everything here is operative, except the windshield-heater ;-) http://www.t3r.de/fg/seneca/fgfs-screen-013.jpg closeup of the annunciator panel and the gear-transit warning light. http://www.t3r.de/fg/seneca/fgfs-screen-014.jpg closeup of the switch-panel http://www.t3r.de/fg/seneca/fgfs-screen-015.jpg between front-seats: the console for elevator and rudder-trim, fuel selectors and flap lever. Work to do and under construction: - 3d model for King HSI - 3d piper-style dual 50"manifold pressure - 3d piper-style RPM - 3d engine-gauges (fuel/oil,CHT,EGT...) - 3d Autopilot Altimatic IIIc - textures for the switch-panel The FDM I use JSBSim with v2.0 config files. The aerodynamics sections were generated using DATCOM+. The results are impressive - the performance values are close to the original airplane. Work to do and under construction: - fine tune the aerodynamics - implement drag coefficients for open cowl-flaps and landing gear - supercharge the engines - get a better propeller, the propC10v I use from the c310 does not seem to produce enough thrust. Still a lot to do before this is usable - I keep you informed... Greetings, Torsten ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
