Hello everybody, I have a new Altimeter ready for the c172p cockpit. However, I have a few questions regarding the panel illumination.
1. All the current instruments, except the AI (gyro) have illuminated knobs. Should I keep this with any new instrument? 2. I have problems with materials that don't use a texture map. Even when the light-control is "off", standard AC3D materials seem tohave a white illumination. The illumination turns orange as the light-control is turned up. I was hoping to replace the grey texture map on knobs with a standard AC3D material. Has anyone else experienced such a problem? In case my question is unclear. I'm referring to objects listed in the <animation> <type>material</type> [...]<emission> [...] <factor-prop>/sim/model//material/instruments/factor</factor-prop> in the instrument .xml Thank You, Stephan ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel