At 11:39 AM 6/28/01 -0500, David Cary wrote:
> > (3) Create a netlist from the Schematic and load this into
> > the PCB.
>
>I hear that this runs much quicker if (looking at layout) you add the
>extra step
>of "Design | Netlist Manager | Menu | Clear all nets | Yes" before "Design |
>Load Nets...".
That would defeat the purpose, see below.
>Um... Does this really answer the original question ? Does this really give an
>error when the schematic has real differences from the layout ?
I should have added that, as with the synchronizer, one does not accept and
implement the macros generated, if any. Basically, this check determines if
*any* macros are being created. If update footprints is selected, it will
also detect if any footprints have been changed. It will not necessarily
give an *error* if the schematic is different; rather it will create a
macro to implement the change. If there are no macros the schematic and
board match.
[EMAIL PROTECTED]
Abdulrahman Lomax
P.O. Box 690
El Verano, CA 95433
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
