I'm interested on this cam, but i have a question : can i connect the cam directly to the fox board without using the LM1117-3.3 ? I'm not very pratice on this, so if i can connect it directly should be good. Anyone knows other TTL-cam i can connect directly to the fox? Yuri
_____ Da: [email protected] [mailto:[EMAIL PROTECTED] Per conto di hrmvb Inviato: lunedì 15 ottobre 2007 11.36 A: [email protected] Oggetto: [foxboard] CAM VGA100 camera gives Tux Case the evil eye! After a lot of tweaking with the camera interface code from DeSantix (http://www.desantix <http://www.desantix.it/index.php?page=show_articles&cmd=show_article&id=193 > .it/index.php?page=show_articles&cmd=show_article&id=193) I finally got it working! The trick was to change the baudrate to 19200, reduce the packet size to 256 bytes, and increase the wait cycle to 600 for the response. Then I drilled out the left eye of the Tux case and placed the cam-vga100 cmos camera lense just behind it. Now Tux can watch over my office all day long! - Harm
