Sorry, don't know. You could check the datasheet, it's on my site: http://www.certeza.nl/downloads/C328-7640UM_V3.pdf
- Harm --- In [email protected], "Roberto A. Foglietta" <[EMAIL PROTECTED]> wrote: > > Very interesting... how many frame per minute you could capture with > this new baudrate and packetsize? > > 2007/10/30, Acquistapace Yuri <[EMAIL PROTECTED]>: > > > > > > I'm interested on this cam, but i have a question : can i connect the cam directly to the fox board without using the LM1117-3.3 ? I'm not very pratice on this, so if i can connect it directly should be good. > > > > Anyone knows other TTL-cam i can connect directly to the fox? > > > > Yuri > > > > > > ________________________________ > Da: [email protected] [mailto:[EMAIL PROTECTED] Per > conto di hrmvb > > Inviato: lunedì 15 ottobre 2007 11.36 > > A: [email protected] > > Oggetto: [foxboard] CAM VGA100 camera gives Tux Case the evil eye! > > > > > > After a lot of tweaking with the camera interface code from DeSantix > > (http://www.desantix.it/index.php?page=show_articles&cmd=show_article&id=193) > > I finally got it working! > > The trick was to change the baudrate to 19200, reduce the packet size > > to 256 bytes, and increase the wait cycle to 600 for the response. > > > > Then I drilled out the left eye of the Tux case and placed the > > cam-vga100 cmos camera lense just behind it. > > Now Tux can watch over my office all day long! > > > > - Harm > > Cheers, > -- > /roberto >
