The Etrax FS is a different chip: it only has 1 USB but 2 ethernet ports, so
that would require a new board alltogether. Also, I don't think they are pin
compatible.
Axis makes a board for the Etrax FS, and if you want a board with an ARM chip,
there's plenty of vendors there as well. But they target different embedded
markets.
Dave
sigle <[EMAIL PROTECTED]> wrote:
Is it possible change in the Foxboard 100 Mhz Etrax 100LX --> 200 Mhz Etrax FX?
In the first foxboards was CPU, RAM and ROM in the same chip (etrax 100LX MCM
4+16).
Then they put CPU and memory separately - cpu (etrax 100lx) and separately ROM
8 MB + RAM 32 MB.
Next step may be faster processor etrax FX in the foxboard - why someone dont
made such system (200 Mhz etrax FX + separately 8MB RAM + separately 32 MB RAM
= all in the foxboard).
The same is with ARM processors: 60 Mhz ARM7 have RAM + ROM in the chip
(philips, cirrus, etc), but 200 MHZ ARM9 have no RAM and ROM in the chip
(philips, cirrus, etc) :(
------------------------------
New York Times: Vene mõjuvõim Baltikumis suureneb
Loe lähemalt Eesti Päevaleht Online'ist: www.epl.ee/artikkel/407508
