Is it possible to have a vhdl board with bigger atmel fpga ? I mean A3P600 or A3P1000 ? Are they pin compatible ? I have an application where more resource inside can help me
best regards Andrea Maccaferri Sergio Tanzilli ha scritto: > > Hi to all > > We are design a new board with Atmel AT91SAM9260 (ARM9). Very soon a FAQ > web page will be published to get comments and tips on this new project. > > The FOX Board LX832 will live as is for long time but we would like to > add a new series of boards based on that chip. > > Sergio Tanzilli > Acme Systems srl > > > The Etrax FS is a different chip: it only has 1 USB but 2 ethernet > > ports, so that would require a new board alltogether. Also, I don't > > think they are pin compatible. > > > > Axis makes a board for the Etrax FS, and if you want a board with an > ARM > > chip, there's plenty of vendors there as well. But they target > different > > embedded markets. > > > > Dave > > > > > > */sigle <[EMAIL PROTECTED] <mailto:sigle666%40hot.ee>>/* wrote: > > > > Is it possible change in the Foxboard 100 Mhz Etrax 100LX --> 200 > > Mhz Etrax FX? > > > > In the first foxboards was CPU, RAM and ROM in the same chip (etrax > > 100LX MCM 4+16). > > Then they put CPU and memory separately - cpu (etrax 100lx) and > > separately ROM 8 MB + RAM 32 MB. > > Next step may be faster processor etrax FX in the foxboard - why > > someone dont made such system (200 Mhz etrax FX + separately 8MB RAM > > + separately 32 MB RAM = all in the foxboard). > > > > The same is with ARM processors: 60 Mhz ARM7 have RAM + ROM in the > > chip (philips, cirrus, etc), but 200 MHZ ARM9 have no RAM and ROM in > > the chip (philips, cirrus, etc) :( > > > > > > > > ------------------------------ > > New York Times: Vene mõjuvõim Baltikumis suureneb > > Loe lähemalt Eesti Päevaleht Online'ist: www.epl.ee/artikkel/407508 > > <http://www.epl.ee/artikkel/407508 <http://www.epl.ee/artikkel/407508>> > > > > > > > >
