Hi to all We are design a new board with Atmel AT91SAM9260 (ARM9). Very soon a FAQ web page will be published to get comments and tips on this new project.
The FOX Board LX832 will live as is for long time but we would like to add a new series of boards based on that chip. Sergio Tanzilli Acme Systems srl > The Etrax FS is a different chip: it only has 1 USB but 2 ethernet > ports, so that would require a new board alltogether. Also, I don't > think they are pin compatible. > > Axis makes a board for the Etrax FS, and if you want a board with an ARM > chip, there's plenty of vendors there as well. But they target different > embedded markets. > > Dave > > > */sigle <[EMAIL PROTECTED]>/* wrote: > > Is it possible change in the Foxboard 100 Mhz Etrax 100LX --> 200 > Mhz Etrax FX? > > In the first foxboards was CPU, RAM and ROM in the same chip (etrax > 100LX MCM 4+16). > Then they put CPU and memory separately - cpu (etrax 100lx) and > separately ROM 8 MB + RAM 32 MB. > Next step may be faster processor etrax FX in the foxboard - why > someone dont made such system (200 Mhz etrax FX + separately 8MB RAM > + separately 32 MB RAM = all in the foxboard). > > The same is with ARM processors: 60 Mhz ARM7 have RAM + ROM in the > chip (philips, cirrus, etc), but 200 MHZ ARM9 have no RAM and ROM in > the chip (philips, cirrus, etc) :( > > > > ------------------------------ > New York Times: Vene mõjuvõim Baltikumis suureneb > Loe lähemalt Eesti Päevaleht Online'ist: www.epl.ee/artikkel/407508 > <http://www.epl.ee/artikkel/407508> > > >
