Hi All, I am getting inconsistent results when flashing LX816 via ftp and http
Flashing stops during loading. Wrong HWID, etc. 220 FOXSDK 1.0 - LX816 - svn 18 (Feb 21 2008) ready. 331 User name okay, need password. 230 User logged in, proceed. 250 Command successful. 200 Command okay. 500 Syntax error. 227 Entering Passive Mode (10,45,10,210,14,28) 150-Shutting down processes. Preparing system for upgrade ... Starting run level 4 (stop most daemons) ... Waiting for run level 4 to start ... Run level 4 started. Waiting for run level 4 to finish ... Run level 4 finished. Stopping some remaining processes. sending TERM signal ... Most processes stopped. The file system will be factory default before reboot. Unmounting file system /var ... umount /var failed with exit status: 1 Unmounting file system /mnt/flash ... 150 Opening data connection. 214-Virtual target execution. Receiving new firmware ... No HWID in bootblock, continuing anyway. Erasing old file system ... 1% 3% 5% 7% 9% 11% 13% 15% 16% 18% 20% 22% 24% 26% 28% 30% 32% 33% 35% 37% 39% 41% 43% 45% 47% 49% 50% 52% 54% 56% 58% 60% 62% 64% 66% 67% 69% 71% 73% 75% 77% 79% 81% 83% 84% 86% 88% 90% 92% 94% 96% 98% 100% Loading new file system ... 1% 2% 3% 4% 5% 7% 8% 9% 10% 11% 12% 14% 15% 16% 17% 18% 20% 21% 22% Dead LX816 What is the processes when a board firmware is updated? Is there any debug information that can be displayed? Why are the LX816 less reliable compared to the LX100 (classic boards)? Sometime I get this on the LX816 when uploading a new firmware. 'Wrong HWID! The uploaded firmware cannot run on this hardware.' -- IT Department Pharma Nord (UK) Ltd Telford Court Morpeth Northumberland NE61 2DB Tel:. +44 1670 519 989 Fax:. +44 1670 534 903
