Hello Lloyd, It seems to me a problem with the image generated inside your SDK. As a general rule, the WEB and FTP procedures of flashing can be used only if you don't change the partition table (advanced settings in make menuconfig) of the SDK. If you need to change that partition table the only method to flash the Fox is through the LAN procedure.
In general LX816 boards are more reliable than the classic RED Foxes. Please try to download from our the factory default image for your LX816: http://www.acmesystems.it/?id=704 and try with that image to reflash your board via FTP or WEB. Once you have a stable setup for flashing you can start to experiment what's wrong inside the options of your SDK as I am convinced is your problem. Let me know if you don't manage instead to reflash the Fox LX816 with the factory default image. Best regards, Roberto Asquini Lloyd Bailey ha scritto: > > Hi All, > > I am getting inconsistent results when flashing LX816 via ftp and http > > Flashing stops during loading. Wrong HWID, etc. > > 220 FOXSDK 1.0 - LX816 - svn 18 (Feb 21 2008) ready. > 331 User name okay, need password. > 230 User logged in, proceed. > 250 Command successful. > 200 Command okay. > 500 Syntax error. > 227 Entering Passive Mode (10,45,10,210,14,28) > 150-Shutting down processes. > Preparing system for upgrade ... > Starting run level 4 (stop most daemons) ... > Waiting for run level 4 to start ... > Run level 4 started. > Waiting for run level 4 to finish ... > Run level 4 finished. > Stopping some remaining processes. > sending TERM signal ... > Most processes stopped. > The file system will be factory default before reboot. > Unmounting file system /var ... > umount /var failed with exit status: 1 > Unmounting file system /mnt/flash ... > 150 Opening data connection. > 214-Virtual target execution. > Receiving new firmware ... > No HWID in bootblock, continuing anyway. > Erasing old file system ... > 1% 3% 5% 7% 9% 11% 13% 15% 16% 18% 20% 22% 24% 26% 28% 30% 32% 33% 35% > 37% 39% 41% 43% 45% 47% 49% 50% 52% 54% 56% 58% 60% 62% 64% 66% 67% 69% > 71% 73% 75% 77% 79% 81% 83% 84% 86% 88% 90% 92% 94% 96% 98% 100% > Loading new file system ... > 1% 2% 3% 4% 5% 7% 8% 9% 10% 11% 12% 14% 15% 16% 17% 18% 20% 21% 22% > > Dead LX816 > What is the processes when a board firmware is updated? > Is there any debug information that can be displayed? > Why are the LX816 less reliable compared to the LX100 (classic boards)? > > Sometime I get this on the LX816 when uploading a new firmware. > > 'Wrong HWID! The uploaded firmware cannot run on this hardware.' > > -- > IT Department > Pharma Nord (UK) Ltd > Telford Court > Morpeth > Northumberland > NE61 2DB > Tel:. +44 1670 519 989 > Fax:. +44 1670 534 903 > > -- Roberto Asquini Acme Systems srl [EMAIL PROTECTED] http://www.acmesystems.it
